PDA

View Full Version : Torque Wrench



MWF FEED
3rd Oct 2020, 03:11 AM
We Use these 3-15nm Sandvik torque wrenches for our insert tooling at work and I thought it would be a good little wrench for doing up action screws, scope rings and mounts etc, plus other low torque jobs around the shed.

I probably wouldn't buy one at full retail ($190) but I picked it up for $100 from the tool rep, it might be something to consider if you tinker with guns, if we didn't use them at work I wouldn't had known they existed.

Cheers.

IMG_0302.jpg (https://metalworkforums.com/attachment.php?attachmentid=389022&d=1601652745)IMG_0303.jpg (https://metalworkforums.com/attachment.php?attachmentid=389023&d=1601652806)
Attached Images

https://metalworkforums.com/images/attach/jpg.gif IMG_0302.jpg (https://metalworkforums.com/attachment.php?attachmentid=389022&d=1601652745) (196.9 KB)
https://metalworkforums.com/images/attach/jpg.gif IMG_0303.jpg (https://metalworkforums.com/attachment.php?attachmentid=389023&d=1601652806) (134.7 KB)




Read and reply to the full thread at metalworkorums.com.... (https://metalworkforums.com/showthread.php?t=205729&goto=newpost)