MWF FEED
14th December 2020, 04:40 AM
Hy guys, it is my first post on forum and I need your help with some advice for to improve my wasted oil burner temperature, My babington burner can melt cooper wire in few seconds and a cooper pot for casting in 5 minutes but the temperature obtained inside the forge is not sufficient for damascus steel making. How to improve my burner to increase the temperature at 2372 F (1300*Celsius) to obtain almost white color steel for forge welding.
My burner use wasted oil from kitchen, car and hydraulic oil, burn 2,5 liters /hour , air pressure from compressor is 2,5 atm and I attach a short movie and a picture with it
Attached Images
https://metalworkforums.com/images/attach/jpg.gif 131002906_225443952323564_8388410861607444565_n.jpg (https://metalworkforums.com/attachment.php?attachmentid=390034&d=1607879521) (97.3 KB)
Attached Files
https://metalworkforums.com/images/attach/mp4.gif video-1607879314.mp4 (https://metalworkforums.com/attachment.php?attachmentid=390033&d=1607879506) (1.04 MB)
Read the full thread at metalworkforums.com... (https://metalworkforums.com/showthread.php?t=206026&goto=newpost)
My burner use wasted oil from kitchen, car and hydraulic oil, burn 2,5 liters /hour , air pressure from compressor is 2,5 atm and I attach a short movie and a picture with it
Attached Images
https://metalworkforums.com/images/attach/jpg.gif 131002906_225443952323564_8388410861607444565_n.jpg (https://metalworkforums.com/attachment.php?attachmentid=390034&d=1607879521) (97.3 KB)
Attached Files
https://metalworkforums.com/images/attach/mp4.gif video-1607879314.mp4 (https://metalworkforums.com/attachment.php?attachmentid=390033&d=1607879506) (1.04 MB)
Read the full thread at metalworkforums.com... (https://metalworkforums.com/showthread.php?t=206026&goto=newpost)