Tatra V8 engine tear down project

[MWF FEED]

Hello all, this is a start of a long project. I was looking for a small compact v8 engine for a project i have in mind and finally got myself a Tatra V8 engine. About 40cm in length and about 60cm wide all aluminum block, air cooled. 2.5 liter 100 HP. So after 4 months it has arrived and is complete. Have started to strip the motor down as you can see the distributor cap got smash up to pieces and the distributor got damage,so far can not see any other damage on the motor which is good as it was not pack into wooden shipping crate.

!cid_AC600136-F528-4467-951E-DDFB14EC20B2.jpg (https://metalworkforums.com/attachment.php?attachmentid=396812&d=1644563862)!cid_B3D3C827-7421-4A94-A571-B9B8379A227A.jpg (https://metalworkforums.com/attachment.php?attachmentid=396813&d=1644563904)!cid_EEF9C17B-D487-48FA-8342-C5A410FCA420.jpg (https://metalworkforums.com/attachment.php?attachmentid=396811&d=1644563819)IMG_8713.jpg (https://metalworkforums.com/attachment.php?attachmentid=396814&d=1644563971)IMG_8717.jpg (https://metalworkforums.com/attachment.php?attachmentid=396819&d=1644564190)IMG_8715.jpg (https://metalworkforums.com/attachment.php?attachmentid=396815&d=1644564014)IMG_8716.jpg (https://metalworkforums.com/attachment.php?attachmentid=396816&d=1644564049)IMG_8729.jpg (https://metalworkforums.com/attachment.php?attachmentid=396817&d=1644564100)IMG_8730.jpg (https://metalworkforums.com/attachment.php?attachmentid=396818&d=1644564142)IMG_8731.jpg (https://metalworkforums.com/attachment.php?attachmentid=396820&d=1644564240)
Attached Images

https://metalworkforums.com/images/attach/jpg.gif IMG_8731.jpg (https://metalworkforums.com/attachment.php?attachmentid=396820&d=1644564240) (259.1 KB)
https://metalworkforums.com/images/attach/jpg.gif IMG_8717.jpg (https://metalworkforums.com/attachment.php?attachmentid=396819&d=1644564190) (241.7 KB)
https://metalworkforums.com/images/attach/jpg.gif IMG_8730.jpg (https://metalworkforums.com/attachment.php?attachmentid=396818&d=1644564142) (251.6 KB)
https://metalworkforums.com/images/attach/jpg.gif IMG_8715.jpg (https://metalworkforums.com/attachment.php?attachmentid=396815&d=1644564014) (192.8 KB)
https://metalworkforums.com/images/attach/jpg.gif IMG_8716.jpg (https://metalworkforums.com/attachment.php?attachmentid=396816&d=1644564049) (238.5 KB)
https://metalworkforums.com/images/attach/jpg.gif IMG_8729.jpg (https://metalworkforums.com/attachment.php?attachmentid=396817&d=1644564100) (254.7 KB)
https://metalworkforums.com/images/attach/jpg.gif IMG_8713.jpg (https://metalworkforums.com/attachment.php?attachmentid=396814&d=1644563971) (203.0 KB)
https://metalworkforums.com/images/attach/jpg.gif !cid_EEF9C17B-D487-48FA-8342-C5A410FCA420.jpg (https://metalworkforums.com/attachment.php?attachmentid=396811&d=1644563819) (234.8 KB)
https://metalworkforums.com/images/attach/jpg.gif !cid_AC600136-F528-4467-951E-DDFB14EC20B2.jpg (https://metalworkforums.com/attachment.php?attachmentid=396812&d=1644563862) (231.7 KB)
https://metalworkforums.com/images/attach/jpg.gif !cid_B3D3C827-7421-4A94-A571-B9B8379A227A.jpg (https://metalworkforums.com/attachment.php?attachmentid=396813&d=1644563904) (231.5 KB)
https://metalworkforums.com/images/attach/jpg.gif IMG_8712.jpg (https://metalworkforums.com/attachment.php?attachmentid=396810&d=1644563717) (247.3 KB)




Read the full thread at metalworkforums.com... (https://metalworkforums.com/showthread.php?t=207747&goto=newpost)