Engine mounts.

[MWF FEED]

Engine mounts on the bike were pretty awful: The front one looked like something off a Sherman tank, the top mounts looked like meccano pieces, six pieces in all, held together by 10 bolts. The rear one were OK, but I decided to replace them so they matched the other I made. After I made these mounts, I decided to add a remote spin on filter and cooler, so I change the design to incorporate mounting points for them.
Attached Images

https://metalworkforums.com/images/attach/jpg.gif 1.jpg (https://metalworkforums.com/attachment.php?attachmentid=396997&d=1644909329) (30.0 KB)
https://metalworkforums.com/images/attach/jpg.gif 2.jpg (https://metalworkforums.com/attachment.php?attachmentid=396998&d=1644909343) (76.7 KB)
https://metalworkforums.com/images/attach/jpg.gif 3 (2).jpg (https://metalworkforums.com/attachment.php?attachmentid=396999&d=1644909362) (140.5 KB)
https://metalworkforums.com/images/attach/jpg.gif 264153258_3155189974741027_2312954916388481139_n.jpg (https://metalworkforums.com/attachment.php?attachmentid=397003&d=1644909509) (115.0 KB)
https://metalworkforums.com/images/attach/jpg.gif 4.jpg (https://metalworkforums.com/attachment.php?attachmentid=397000&d=1644909382) (73.4 KB)
https://metalworkforums.com/images/attach/jpg.gif 5.jpg (https://metalworkforums.com/attachment.php?attachmentid=397001&d=1644909404) (57.3 KB)
https://metalworkforums.com/images/attach/jpg.gif 6.jpg (https://metalworkforums.com/attachment.php?attachmentid=397002&d=1644909415) (101.7 KB)




Read the full thread at metalworkforums.com... (https://metalworkforums.com/showthread.php?t=207768&goto=newpost)