More polishing.

[MWF FEED]

The clear coat on the forks and sides wasn't up to scratch so I stripped them and re polished them. I also re-polished the chain adjusters, headlight brackets and brake backing plate. I might make some new headlight brackets, these ones are looking a little shabby. Brake backing plate came up pretty good with just a quick rub on the mop . The wheels have been sitting on the floor of the study for a couple months now so have lost a bit of their shine. When I've finished with the other bits I'll de spoke and polish up the hubs and rims again.
Attached Images

https://metalworkforums.com/images/attach/jpg.gif WIN_20220830_15_55_27_Pro.jpg (https://metalworkforums.com/attachment.php?attachmentid=399688&d=1661847153) (182.2 KB)
https://metalworkforums.com/images/attach/jpg.gif WIN_20220830_15_55_50_Pro.jpg (https://metalworkforums.com/attachment.php?attachmentid=399689&d=1661847177) (156.8 KB)
https://metalworkforums.com/images/attach/jpg.gif WIN_20220830_15_57_26_Pro.jpg (https://metalworkforums.com/attachment.php?attachmentid=399690&d=1661847202) (255.2 KB)
https://metalworkforums.com/images/attach/jpg.gif WIN_20220830_15_57_46_Pro.jpg (https://metalworkforums.com/attachment.php?attachmentid=399691&d=1661847221) (253.3 KB)
https://metalworkforums.com/images/attach/jpg.gif WIN_20220830_15_56_17_Pro.jpg (https://metalworkforums.com/attachment.php?attachmentid=399687&d=1661847132) (168.2 KB)




Read the full thread at metalworkforums.com... (https://metalworkforums.com/showthread.php?t=208415&goto=newpost)