bandsaw trunion support bracket for 14'' bandsaw

[robyn2839]

am looking for a trunion support bracket for a carbatec 14'' bandsaw any help would be appreciated thanks, I am in Queensland

and no to Carbatec and machineryhouse, rang them today

[orraloon]

Its a shame as the rest of the saw looks in good condition. Been a while since that saw was on sale here but all the main tool places had a version of it. Have a try at Gasweld and Timbecon on off chance they may know.
The other way is try Grizzly but you will be up for postage from the USA.
Parts for The Classic 14" Bandsaw at Grizzly.com (https://www.grizzly.com/products/g0555/parts)

Regards
John

[China]

It is jus a generic saw sold under too many brands to list, try H&F, if all else fails it would not be that difficult to fabricate from steel.

[Mobyturns]

am looking for a trunion support bracket for a carbatec 14'' bandsaw any help would be appreciated thanks, I am in Queensland

and no to Carbatec and machineryhouse, rang them today


Try Toolex | B/Saw 14" Trunnion Supp Brack 533101-132 110045 (https://www.toolex.com.au/products/533159)

Looks very similar.

Also, worth a try if you get desperate Bandsaw Parts : eReplacementParts.com (https://www.ereplacementparts.com/bandsaw-parts-c-18715_18716_18720.html)

[clear out]

How many users ever tilt the table on their bandsaw ?

I bought an abused Wadkin Bursgreen bandsaw with the trunnion broken.

It was a straight forward job to fab up something to just attach the table in a fixed horizontal position.

I later scored another identical saw from Camoz on here so with bit of bartering he scored a metal lathe and the men’s shed got my old saw.:D
H.

[Tom trees]

Seems you could cut the other segment off clean the underside to lay on some say 8 or 10mm steel plate.
Could make tabs if necessary afterwards, once you've made sure its right.

Tom

[robyn2839]

yhankyou to all ,got a guy to weld it for me