Crunchie
30th October 2022, 03:22 PM
I bought the Aschi's Workshop plans about the same time as Potts (see his post "New plans, use some scraps") and sat on them for awhile, until Glenn's post got me going.
I scaled the measurements up by 1.6 so that I could use wheels cut from my 40mm cutter. Materials used are Pine, Meranti, Oregon and Jarrah, with Spotted Gum and Red Gum wheels. Yep, I was using scraps and ended up making 12 vehicles with just a few short bits of timber.
518654 518655 518656 518657
I started thinking about making a Ute version, so I cut a channel in a length of pine on my table saw and put a lid on one so that the kids could "post" little things.
518658 518659 518660 518661
I scaled the measurements up by 1.6 so that I could use wheels cut from my 40mm cutter. Materials used are Pine, Meranti, Oregon and Jarrah, with Spotted Gum and Red Gum wheels. Yep, I was using scraps and ended up making 12 vehicles with just a few short bits of timber.
518654 518655 518656 518657
I started thinking about making a Ute version, so I cut a channel in a length of pine on my table saw and put a lid on one so that the kids could "post" little things.
518658 518659 518660 518661