Myford mg12 grinder

[MWF FEED]

New to my workshop
myford mg12 cylindrical grinder
i think it was used once or twice
bit of surface rust in areas but still has packing grease on a lot of the parts
came from Clisby factory - used for the small lathes they made
has been in storage for more than 20 years

does any one have a unit like this .
Would love to get my hands on the internal grinding attachment



05DD709D-311C-4E30-993D-31EF614A8351.jpg (https://metalworkforums.com/attachment.php?attachmentid=401736&d=1677115091)
Attached Images

https://metalworkforums.com/images/attach/jpg.gif 05DD709D-311C-4E30-993D-31EF614A8351.jpg (https://metalworkforums.com/attachment.php?attachmentid=401736&d=1677115091) (114.7 KB)
https://metalworkforums.com/images/attach/jpg.gif 7C2A4D73-51C8-4B55-90DF-39EFA27BBA19.jpg (https://metalworkforums.com/attachment.php?attachmentid=401737&d=1677115121) (113.8 KB)
https://metalworkforums.com/images/attach/jpg.gif 1FDF294A-EF73-46B3-A825-CD8F4F963453.jpg (https://metalworkforums.com/attachment.php?attachmentid=401738&d=1677115151) (81.6 KB)




Read the full thread at metalworkforums.com... (https://metalworkforums.com/showthread.php?t=208938&goto=newpost)