PDA

View Full Version : Latex rubber or similar for moulds?



ribot
16th January 2006, 04:55 PM
Can anyone tell me where I could get anything that can be used more than once as a mould for material such as acrylic resin ?
I would like to duplicate a small carving.

ozwinner
16th January 2006, 04:58 PM
Try here. (http://http://shop.adultshop.com.au/)

Al :D

redwood
16th January 2006, 05:01 PM
Try here. (http://http://shop.adultshop.com.au/)

Al :D

:rolleyes:

redwood
16th January 2006, 05:10 PM
Can anyone tell me where I could get anything that can be used more than once as a mould for material such as acrylic resin ?
I would like to duplicate a small carving.

Ribot, you need poly-latex. find it in the melb yellow pages. its easy to use just brush on half doz coats and sclice in half with a scalpel to make your mould :D

Yor sig below. sad sheen never won a home GP:( remember when he and robberts at silverstone came around the final corner into the straight with roberts a bee`s dik in front. breathtaking stuff:eek:

ribot
16th January 2006, 05:21 PM
Thanks redwood ! I didn't get to see much of Barry racing but I do know that he was good friends with the Rossi family, both Valentino and his dad and I just can't help but feel that some of Barrys cheekyness has rubbed of on Valentino.
Come to think of it Valentino dedicated one of his moto GP wins to Barry shortly after his death, Valentino stood on the podium (first place) holding up a tee shirt sporting the old number 7. Very touching. Getting all misty eyed now.

redwood
16th January 2006, 05:41 PM
if you ever get the chance watch "silverstone dreaming" youl see sheen and robberts and co at their best. and love Rossi, what a gun:D

ribot
16th January 2006, 05:45 PM
Would absolutely love to!:)

redwood
16th January 2006, 05:46 PM
i remember seeing one of the tv life style shows when sheen was alive and it showed his house in QLD and in his living roon he had an alcove with his last GP bike in it, all flood lit up... that bought a tear to my eye... beautifull:o

Master Splinter
19th January 2006, 01:25 AM
All you need is here

www.barnesproducts.com.au