whiteant
3rd August 2006, 09:08 PM
having just purchased the domi Im very impressed with her speed and very snug joints. one thing I have found helpfull when dry fitting up a job is to put the dominos in the microwave on high for about 30secs each Ive only tried this with the 6mm x 40mm doms it takes them from being a remove with pliers fit to still a good tight fit and so much easier to dry fit test your job I used to do the same thing to 10mmx75mm hardwood dowels when Iwas fixing table rails to the legs it makes the job so much easier.
you dont have to do them one at atime put say ten in and give it about 3mins but keep an eye on them because time can vary depending on your microwave power
you dont have to do them one at atime put say ten in and give it about 3mins but keep an eye on them because time can vary depending on your microwave power