Dumb question

[DaveInOz]

Does the bandsaw do the same job as a jigsaw?
What else does it do?

I obviously haven't needed one yet or I'd know http://ubb.ubeaut.com.au/ubb/smile.gif but when I'm scratching my head as to what to use one day, I'll need to know their uses and capabilities.

[Bruce Bell]

Dave the short answer is no the long answer is depends on what you want to make. The bandsaw is generally a do it all while the jig saw is also a do it all but in some cases not as good.

[DarrylF]

A bandsaw can cut almost any curve, up to 6" or so thick and do it straighter and quicker than a jigsaw. It can also re-saw boards into thinner boards.

You can take the jigsaw to the job, which you can't do with the bandsaw of course - that's now the only time I ever use a jigsaw these days - and of course cutting a hole in the middle of a panel etc.

I came across a bargain on a Delta bandsaw before I really needed it, but I've found it very handy.

[DaveInOz]

thanks guys - you never know until you ask http://ubb.ubeaut.com.au/ubb/smile.gif