PDA

View Full Version : Signing the bases of your work



Joash
3rd November 2006, 09:02 PM
I'm wondering how you guys sign the bases of your work. Do you use a hand-held engraver, or a pen? texter? etc:??

Please post your ideas. I should have posted this earlier, as I am taking all my work into FORM tommorow, and I havent signed any of my work. See how many ideas I can get tonight. Some bases are flat, but most are curved with beads etc:

Thanks,

Joash

Jim Carroll
3rd November 2006, 09:04 PM
Use the Razortip woodburning pen with the smallest ball tip pen,

Joash
3rd November 2006, 09:06 PM
quick..quick:)
great idea...now where can I find one of them:confused:

Sir Stinkalot
3rd November 2006, 09:24 PM
http://www.cws.au.com/cgi/index.cgi/shopfront/view_by_category?category_id=1107144911

Joash
3rd November 2006, 09:33 PM
thanks for that

any other ideas.....:D

BernieP
3rd November 2006, 10:26 PM
G'Day Joash

Try some ideas in http://www.woodworkforums.ubeaut.com.au/showthread.php?t=338

Cheers Bernie

Hickory
4th November 2006, 02:06 AM
I use a super fine point Sharpie. Before the final coat I Initial and date the piece.

I have seen where fellows scribe their name , species of wood and exact date, etc. But I feel it clouds the issue and perhaps boosts an ego better than finish the piece. I have been looking for a trademark to use instead of Initials. (As are most clay & china pieces)

I have seen where you can print (in reverse) with your inkjet printer, a Signature or Logo and then transfer that image to the work using a hot iron similar to a wood burner with a fat flat tip.
http://images.rockler.com/rockler/images/22545.jpg This one is from www.Rockler.com (http://www.Rockler.com)

http://www.rockler.com/product.cfm?Offerings_ID=5734&TabSelect=Details&SearchHandle=DADBDBDHDADADDDGGGGFGEDBDDGFGFDGCNDEDGDBDJCNDEDBDJDACNGBGCDADCCNDJGBDFGDDDDFGFDDGCGEDIGCDADADADBDADADADBDEGJGNGBGHGFCAHEHCGBGOHDGGGFHCDADADADEDADADADADADADADBDFDADADADBDADADADADADADADADADADADADBDADADADBDEGJGNGBGHGFCAHEHCGBGOHDGGGFHCDADADADBDB

I'm not connected to Rockler, aside from drooling in their store, and think this is a cool way to sign a piece once I secure a trademark.

BobL
4th November 2006, 11:12 AM
I use a mix of things,

- a "branding iron" with my initials that I use for small things. It's quite hard to use as it sometimes burns in more on one side than the other. I also have a Japanese branding iron made for cakes that brands a small maple leap - cute, but also hard to use.

- a set of letter/number punches but they are not easy to see on some types of timber.

- have also used a Dremel with an engraver type tip.

Joash
4th November 2006, 11:19 AM
ok, thanks, put some photos on later

thanks again:)

Joash

OGYT
4th November 2006, 03:46 PM
Joash, I use a cheap crafter's woodburner that I bought at Wal-Mart for about 20USD. I sharpened the point and then smoothed the tip so it would sort of glide over the wood. Works okay on all types of wood... except it really ain't too cool on endgrain.

Gil Jones
4th November 2006, 04:34 PM
Joash, I started out using a roller-ball ink pen. Then I used a wood burning kit (rather like a soldering pencil), but it did not have the wattage (heat) to burn in the words/numbers unless I moved in very slow motion. Jim Carroll's suggestion about the Razortip pyrography instrument, and the small ball tip is a good one. I use the Burnmaster Eagle, and a Detail Master #6A hardwired pen for signing my pieces, and find it to be of excellent quality, and performance. It is a 130-watt, variable output controller, and will burn a fine line as fast as I can write.

hughie
8th November 2006, 10:04 AM
Joash,

What I am looking at is a small stamp made from brass that I can heat up and sign it that way. It will have dual aspect of signature and logo as well

http://www.jackiechankids.com/files/Chop.htm

I 'll fit it to a soldering iron.. I gotta a couple of spares lying around :D


It works out simpler and quicker than actual writting, plus the machine work/engraving is not that expensive

conwood
8th November 2006, 02:34 PM
engraving or burning is the go in your case. I also engrave on different metals, which I then shape and fasten to my items.

I have also used a punch set directly on the timber or metal plate.

If all else fails, a texta might be your immediate option.


cheers,
conwood

OGYT
8th November 2006, 03:44 PM
What's a texta?
signed,
Clueless
:o)

Joash
8th November 2006, 03:48 PM
one of those things that has a lot of ink, and that little kids love to get a hold of

Wood Butcher
8th November 2006, 03:49 PM
What's a texta?
signed,
Clueless
:o)
A permanent marker

Rookie
8th November 2006, 03:53 PM
What's a texta?
signed,
Clueless


Thought you'd know. It's plural for Texan. From the latin "Textai" meaning "many cows".

How ya doing Al? ;)