View Full Version : catscroll
bat
30th April 2003, 03:34 PM
test
bat
30th April 2003, 04:13 PM
2nd place in the county fair.
bat
30th April 2003, 04:14 PM
towers
bat
1st May 2003, 12:12 AM
pic
bat
1st May 2003, 12:13 AM
pic
bat
1st May 2003, 12:13 AM
pic
bat
1st May 2003, 12:14 AM
pic
bat
1st May 2003, 12:19 AM
pic
Mick4412
1st May 2003, 08:31 PM
Some nice pieces
Can you give any details of timbers used, and construction ( joining, laminating etc ) especially of Desk, table top, and night stand
Thanks
mick
bat
3rd May 2003, 12:16 AM
Originally posted by Mick4412
Some nice pieces
Can you give any details of timbers used, and construction ( joining, laminating etc ) especially of Desk, table top, and night stand
Thanks
mick
The desk was done using a radius particle board frame, wrapped with timberflex, and veneered with quartered Maple. The countertop is plastic laminate, and the transaction top is granite with a steel subtop.
The tabletop(s I actually made 6 or 8 of these) are mahogany veneer on an MDF substrate, with a solid wood mahogany edge. These were done almost entirely with a router.
The nightstand base is cherry, mortise and tenon joinery, and the top is particle board, veneered with quartered maple.
I've got a ton of rolls of film that I have yet to develop. I'll add more photos in the next few weeks.
bat
4th May 2003, 03:42 PM
pic
bat
4th May 2003, 03:45 PM
pic
bat
4th May 2003, 03:50 PM
pic
bat
4th May 2003, 03:51 PM
pic
bat
4th May 2003, 03:51 PM
pic
bat
4th May 2003, 04:13 PM
pic
bat
4th May 2003, 04:14 PM
pic
bat
8th May 2003, 03:32 PM
pic
journeyman Mick
30th May 2003, 10:42 PM
What exactly is timberflex and who manufactures it and or distributes it? Looks like it would be really handy for shopfitting work.
bat
31st May 2003, 01:04 PM
Originally posted by journeyman Mick
What exactly is timberflex and who manufactures it and or distributes it? Looks like it would be really handy for shopfitting work.
http://www.interiorproducts.com/products_timberflex.html
The company that I work for made the desk that you will see on the bottom left of that webpage.
Timberflex, IMO, is a very good product. I do not know if it, or anything similar, is available in Australia.
Taffy
4th June 2003, 10:57 PM
Bat
I rather like the enterntainment unit, how deep is it, do you have a plan/drawing . was it made from all real wood or are some of the panels laminated board.
Whatever looks ok
Taffy
bat
4th June 2003, 11:55 PM
Are you referring to the large cherry one?
If so, the interior is all MDF with a veneer that is attached at the factory, and the face frame and doors are solid wood.
I don't have any plans for it. I believe that it is 24" deep. and the sides probably 15 or 16" deep. I did that project November/December 2001.
bat
15th June 2003, 05:19 PM
Another Big Horn Sheep head.
bat
23rd July 2003, 11:40 AM
A lighthouse.
bat
6th November 2003, 03:08 PM
A desk that I made last year
bat
6th November 2003, 03:15 PM
another view