View Full Version : Cabriole legs
DIY DAN
10th January 2007, 12:36 PM
Anyone know where I can get a pattern for Cabriole Legs. Plan on making a chest of drawers and it will need cabriole legs.
DIY DAN
Gil Jones
10th January 2007, 03:09 PM
G'day Dan,
Try this >> http://www.woodzone.com/plans/cabriole_leg.htm
Skew ChiDAMN!!
10th January 2007, 08:03 PM
If you're feeling masochistic it is possible to turn a "pseudo" cabriole leg by using off-centre turning.
I've tried... once. Frankly, the bandsawn method gives far, far better results. However I still use off-centre turning to create "cabriole style" or "balled" feet suitable for carving into lion's paws, etc.
DIY DAN
10th January 2007, 08:11 PM
G'day Dan,
Try this >> http://www.woodzone.com/plans/cabriole_leg.htm
Thanks Gil, great site, exactly what I wanted.
DIY DAN
Hickory
11th January 2007, 07:53 AM
If you're feeling masochistic it is possible to turn a "pseudo" cabriole leg by using off-centre turning.
I've tried... once. Frankly, the bandsawn method gives far, far better results. However I still use off-centre turning to create "cabriole style" or "balled" feet suitable for carving into lion's paws, etc.
Here in the states, we call them Dutch Feet. (the off-center turned foot) (Wonder what the dutch call them?) Done simply by turning the bottom on center and making a rounded end Then set the tail center off center and you can see the shape of the leg as a shadow, Simply smooth down the "Shadow" leaving a foot.
Fun project using a set of them for a stool, or table, or chair, or something. I have Four ready to finish into a stool when my collection of round-2-its gets here.