PDA

View Full Version : Burl for Box Making



SawDustSniffer
27th January 2007, 07:45 PM
this burl of unknown eucalypti timber is
255mm across the bottom
195mm high on the left hand side
160mm high on the right hand side
275mm from the top of right hand side ,parallel with bottom
22 mm thick

it has a 3 mm cup at 50mm x 50mm lower left corner ( deepest )

was looking for an exotic timber around the same volume ( 255mm x 160mm x 22 mm = Approx 900 cm^3)

first pic is dry
second pic has been wet down with metho

lubbing5cherubs
28th April 2007, 03:56 PM
is these for sale? Or just showing what you got?
Toni

RufflyRustic
28th April 2007, 05:37 PM
swappsies Lubbing' :)

I don't have anything in my stash though :(

lubbing5cherubs
29th April 2007, 02:30 PM
don't have any exotic large pieces. Only pen blanks so this one has to go
Toni

karl164
3rd August 2007, 07:57 PM
Gday I have plenty of osage orange if interested Regards Karl

salty72
12th November 2007, 09:22 PM
I have a ton of stuffcheck out the Buy sell and Swap folder I would be happy to swap or follow the link for quick access
http://www.woodworkforums.com/showthread.php?t=58803