jchappo
17th March 2007, 06:36 PM
Re-read Skews Goblet Tutorial (http://www.woodworkforums.ubeaut.com.au/showthread.php?t=38282&highlight=goblet)last night.
Out to the garage this afternoon, roughed down a piece of recycled timber from a friend's renovating (I think it might be maple) and turned my first goblet.
The inside is not as good as hoped for - I still haven't got the hang of end grain hollowing, the lip has gone wavy, but I am pleased with the overall shape and proportions :)
90mm tall, 43mm across the bowl, the pic shows it standing on the raw timber.
Finish EEE and Shellawax.
Out to the garage this afternoon, roughed down a piece of recycled timber from a friend's renovating (I think it might be maple) and turned my first goblet.
The inside is not as good as hoped for - I still haven't got the hang of end grain hollowing, the lip has gone wavy, but I am pleased with the overall shape and proportions :)
90mm tall, 43mm across the bowl, the pic shows it standing on the raw timber.
Finish EEE and Shellawax.