QbnDusty
20th September 2007, 07:30 PM
Hi Brewers
I have an aluminium pressure barrel which I bought many years ago from the UK Boots the Chemist. They were into home brew supplies at that time but do not seem to be any more. The trouble is that it has a CO2 injector valve with which you can pressurise the barrel by injecting CO2 using a Soda stream cartridge. This is not holding pressure any longer despite replacing all the O rings. Does anyone know of this system and where I might get a replacement valve. Have searched the net but not found anything.
Regards
Geoff
I have an aluminium pressure barrel which I bought many years ago from the UK Boots the Chemist. They were into home brew supplies at that time but do not seem to be any more. The trouble is that it has a CO2 injector valve with which you can pressurise the barrel by injecting CO2 using a Soda stream cartridge. This is not holding pressure any longer despite replacing all the O rings. Does anyone know of this system and where I might get a replacement valve. Have searched the net but not found anything.
Regards
Geoff