hoop pine

[jmaxwell]

is this any good to anyone hoop pine i have milled the butt and trunk
only average slabs some rot and damage asit was hit by lighting and left standing too long . some lower limbs are 150 mm dia by 3 plus m and looks fine . will bring some home if any interest sunhine coast qld

[robyn2839]

what are you asking for it .bob

[robyn2839]

i love using hoop wher abouts on the sunny coast are you. bob

[jmaxwell]

bob for the smaller bits nothing ,for large slabs not sure,any idea they are 5mx800mmx60mm on avg size.also 3mx800mm by two logs to be milled yet.

[robyn2839]

cant help you there mate ,will try to find out for you , any pics . bob

[jmaxwell]

just got timber home driver said 7 ton . will post photo later.

[jmaxwell]

took some time to resize think i have it three other bits draged home whole.

[goodwood1941]

is this any good to anyone hoop pine i have milled the butt and trunk
only average slabs some rot and damage asit was hit by lighting and left standing too long . some lower limbs are 150 mm dia by 3 plus m and looks fine . will bring some home if any interest sunhine coast qld

noticed you have a hoop pine log am interested in 4 lengths 250x75x2400 are you able to help goodwood 1941

[mac 1]

I'm interested, is it green or dryed, let me know when you have worked out a price
Mac

[jmaxwell]

goodwood the logs are cut mostly 150x50, 200x50 ,100x100,150x150 and a lot of slabs .what is it for ?
the tree was hit by lightning some years before it was felled so had some decay on one side and has some blue stain but not to bad . MC not sure need to test, it is all stripped out and drying for 6 months now .as for price i think smaller slabs starting at $100?
Mac give me a hoy if you want to have a look
cheers john

[goodwood1941]

jmaxwell, want to use hoop pine for table top needs to be clear, no knots, thickness is critical (75mm) width approx 250mm, 2400 length. can you still help with this. goodwood1941

[Exador]

goodwood, i'm about to mill some bunya pine which may suit. If jmaxwell can't help, let me know and i'll see what I can get out of the bunya.

[jmaxwell]

sorry GW only have 50-60mm stock
john

[goodwood1941]

goodwood, i'm about to mill some bunya pine which may suit. If jmaxwell can't help, let me know and i'll see what I can get out of the bunya.
Exador, Thanks for the offer, am interested in your Bunya but waiting for a goahead first,will contact you A.S.A.P.when i know. Please let me know if it is urgent at your end. Regards Goodwood1941

[Exador]

No special urgency at this end, mate. We have about 7 cubes of logs, which will be milled as and when. If you think you want it, let me know and I'll keep a log aside for you.