tomgj
23rd October 2007, 07:03 PM
Hi, I was wondering if anyone in the greater Sydney area was able to, or knew of someone to turn large circular frames for me.
These are to accommodate a convex mirror after I have gilded the frame. I used to get these made on a regular basis but the guy who used to do it has moved on.
I have 2 sizes, and 3 profiles. Sizes are 850mm x 110mm (dia x depth) and 600 x 90. One profile is a simple wedge shape, the others are a bit trickier with a few curves, but I can supply a diagram, or a Vector Diagram (corel, ai etc, sorry no CAD) of all of them.
The substrate is unimportant, I was using MDF (I hope thats not swearing here).
Anyway, Thanks in Advance for any help
Cheers
Tom
These are to accommodate a convex mirror after I have gilded the frame. I used to get these made on a regular basis but the guy who used to do it has moved on.
I have 2 sizes, and 3 profiles. Sizes are 850mm x 110mm (dia x depth) and 600 x 90. One profile is a simple wedge shape, the others are a bit trickier with a few curves, but I can supply a diagram, or a Vector Diagram (corel, ai etc, sorry no CAD) of all of them.
The substrate is unimportant, I was using MDF (I hope thats not swearing here).
Anyway, Thanks in Advance for any help
Cheers
Tom