aquarium cabinet

[perthnovice]

i am chasing a set of plans for an aquarium cabinet/stand aquarium will be 72in long 24in wide 24in high i dont really need the cladding just the frame work and in particular the joints that i need to use for maximum strength i was planning on using 75x35 pine only because i can find a s%^tload of this on the building sites and you are not going to see it so no need to use dressed timber thanks in advance for your help.

[Ianab]

No real problem, just frame it with your 75x35 and then clad it with plywood for the bracing. Building a tank stand with only 3x2s takes a bit of design thought, bracing and good joints.
Building with 3x2s and plywood cladding is practically bombproof :2tsup:

Cheers

Ian