Help on a rotary chisel blade

[artman]

Hi All

I am new to this forum and hoping for a little help , i have been a amature wood worker and carver for a few years now , (Mainly using powered tools due to an accident i had) one of my most and fav used tools were the rotary chilsel blades that fitted on to any 100-115 mm angle grinder.

But last time i was in hospital my shed was broken into and all my tools were stolen(around $7000 worth) over time i have replaced some but i can no longer get these blades .

I was wondering if anyone knew of a source or prehaps had a set or 2 for sale .

Many Thanks Pete
<!-- / message -->
<!-- / message -->

[Harry II]

Hi Pete

I'm not sure where you are in Australia but you should be able to find an outlet that sells Arbortech tools, this is a link to their web site:
http://www.arbortech.com.au/view/woodworking-information/industrial_20070412135335

[artman]

Hi Harry II

Sorry should have been more clear they are not the abortech models ,the brand name is rotary chisel (aussie made great tool much better and safer than the abortech model not to mention chaeper ) Timbecon used to stock them but no longer and were no help when i asked about who used to supply them, i will add a pic of the blade ( i Live in melbourne by the way):)

[DJ’s Timber]

Try sending Andy Mac a PM (http://www.woodworkforums.com/private.php?do=newpm&u=7119), he says he uses one at work according to this thread (http://www.woodworkforums.com/showthread.php?t=53367).

I have put a link in the PM above so that you can Private Message him direct :2tsup:.

[Jim Carroll]

We used to sell them , but for some reason they stopped manufacturing them.

In the end they stopped returning emails and phone calls.

They were a very good blade and as you say a lot cheaper than the arbortech.

[artman]

Hi all

I need a little help on this i had a set of (rotary chisel blades aust made )
that were stolen from me when my shed was broken into , i have tried and tried to replace these with out sucess . They are not the abortech model , i will attach a pic so there is no misunderstandings , any help on where to get a set would be GREAT!!!!!!!:)


Mant Thanks Pete

[Jim Carroll]

Your question has been answered in the previous post.

They are no longer available the company who produced them are no longer around.

The only availble ones are the Tuff cut from arbortech.

http://www.arbortech.com.au/view/woodworking-information/tuff-cut_20070412135632

[artman]

Hi All Again


Thanks for your help regarding the rotary chisel blades i will contuine my hunt !


:2tsup: Pete