Stihl 076 CS Manual

[West OZ Mark]

I have pulled my old Stihl 076 out of the shed and I would like to get it up and running. Its been sitting for a while so I would like to go right through it and give it a freshen up. (Its going to do a fair bit of work)
I have been looking for a service manual for it and came across this on Ebay. http://cgi.ebay.com/STIHL-051AV-051-076-076AV-REPAIR-MANUAL-NEW_W0QQitemZ7738833264QQihZ018QQcategoryZ20538QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
Anyone purchased the same manual as this and is it any good?:?
I have a copy of the parts manual but would like the service manual.

Thanks...Mark:2tsup:

[DJ’s Timber]

Fire a PM off to martrix (http://www.woodworkforums.com/member.php?u=5683), pretty sure he has bought one and is using it to rebuild his saw

[BobL]

I have pulled my old Stihl 076 out of the shed and I would like to get it up and running. Its been sitting for a while so I would like to go right through it and give it a freshen up. (Its going to do a fair bit of work)
I have been looking for a service manual for it and came across this on Ebay. http://cgi.ebay.com/STIHL-051AV-051-076-076AV-REPAIR-MANUAL-NEW_W0QQitemZ7738833264QQihZ018QQcategoryZ20538QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
Anyone purchased the same manual as this and is it any good?:?
I have a copy of the parts manual but would like the service manual.

Thanks...Mark:2tsup:

I have one of these (the saw (http://www.woodworkforums.ubeaut.com.au/showthread.php?t=50374) and the manual) and the manual is fine for most purposes. The 051 has a different cc but otherwise the 051 and 076 are the same basic engine. See

[Pat]

Found a pdf on the ArboristSite.com (http://www.arboristsite.com/index.php?) in this thread. (http://www.arboristsite.com/showthread.php?p=902959)

You have to join the site to access the file.

[BobL]

Found a pdf on the ArboristSite.com (http://www.arboristsite.com/index.php?) in this thread. (http://www.arboristsite.com/showthread.php?p=902959)

You have to join the site to access the file.

The one on Aboriste is the parts manual. You have to ask one of the members for the service manual - its 12 Mb so they won't load it onto their forum - maybe there are copyright issues as well.

I always reckon it's worth having manuals as a book. By the time you print it out and bind it up into something that can be used in a workshop you might as well buy the thing. I guess it depends how quickly you need it.

[West OZ Mark]

Thanks guys. :2tsup:

I agree Bob I think I will go ahead and order the Manual. Might get some parts while Im at it.

Thanks...Mark