PJ's Boat Shed

[Cliff Rogers]

Some pics of my friend's shed in Tassie.

We stayed there earlier this month.
They have a very nice spot on the east bank of the Derwent with a fantastic view of Hobart & Mt Wellington.

The work in progress is PJ's 5th boat & his 3rd Geodesic Aerolite (http://gaboats.com/).
The ceiling is a bit low & the light bulbs don't last long but the metal framing is a good place to store clamps in easy reach.

Note the BBQ/Pizza oven out the door in the background, that is another story.

http://www.woodworkforums.com/attachment.php?attachmentid=69846&stc=1&d=1206341322

The white 'bazooka' on the end of the bech is hooked up to an electric kettle by a bit of auto heater hose for steam bending the timber, this one is Huon Pine, the last 2 were Red Cedar... the huon bends easier.

http://www.woodworkforums.com/attachment.php?attachmentid=69847&stc=1&d=1206341322

The in house sound system.

http://www.woodworkforums.com/attachment.php?attachmentid=69848&stc=1&d=1206341322

The buck.

http://www.woodworkforums.com/attachment.php?attachmentid=69849&stc=1&d=1206341322

The floor is marked so the back goes back in the same place each time so that it is level & square.

http://www.woodworkforums.com/attachment.php?attachmentid=69850&stc=1&d=1206341322

The workshop already had this great stainless steel twin tub in it.

http://www.woodworkforums.com/attachment.php?attachmentid=69851&stc=1&d=1206341322

A couple of shots of shadows.

http://www.woodworkforums.com/attachment.php?attachmentid=69852&stc=1&d=1206341322

http://www.woodworkforums.com/attachment.php?attachmentid=69853&stc=1&d=1206341322

[bitingmidge]

Nice Cliff,

You're becoming a bit of a sooky arty boy aren't you?

P
:D:D:D

[Sleeping Dog]

Read that Douglas Adams book, quite good....

What's a buck?

[Cliff Rogers]

Nice Cliff,

You're becoming a bit of a sooky arty boy aren't you?

P
:D:D:D
Have you been told today Midge? http://www.ubeaut.biz/thefinger.gif

What are you going to say when you see the pizza that came out of the oven? :D


....What's a buck?
The horse that the canoe is made on.

[Pagie]

Got a plane of the oven?

[MGR]

:)
Great setup. Nice to see the Chris Smither CG too!

[Cliff Rogers]

Got a plane of the oven?

Nope, there is a better pic in this (http://www.woodworkforums.com/showthread.php?t=69300) thread & some links to possible plans.


:)
Great setup. Nice to see the Chris Smither CG too!
Yup, good fingerpicker, don't hear him much on the radio.