Tonyz
26th January 2004, 01:42 PM
this is a rough drawing of something I made to carry sheets on the trailer.
basiclly 2 legs fit tight inside trailer, mounted to a larger sheet that has through slots on either side and sheet support peices in the middle. The drawing is for the front. For sides dont need the front brace.The slides have recessed coach bolts going through them and through the base with wing nuts under. These just slide in tight against your sheets the wing nuts tightened up and nothing moves. Some rope over the top keeps the police happy and any smaller sheets from jumping out.
Its rough but does the job. I get MDF 'cover sheets' from factories usually for nothing sometimes rough but bit of trimming and useable
basiclly 2 legs fit tight inside trailer, mounted to a larger sheet that has through slots on either side and sheet support peices in the middle. The drawing is for the front. For sides dont need the front brace.The slides have recessed coach bolts going through them and through the base with wing nuts under. These just slide in tight against your sheets the wing nuts tightened up and nothing moves. Some rope over the top keeps the police happy and any smaller sheets from jumping out.
Its rough but does the job. I get MDF 'cover sheets' from factories usually for nothing sometimes rough but bit of trimming and useable