PDA

View Full Version : Router for ornamental lathing



lubbing5cherubs
4th May 2008, 11:12 PM
HI I have a fitting that come with my lathe for router but the 2 routers I got are too fat to fit it so what kind of router do I need to make it fit on the lathe. The paperwork I have found is called a slim body router. Where would i find one of these to buy?
Do you know?
Toni

echnidna
4th May 2008, 11:26 PM
The small ozito can be removed from its base, so that type is used by beginner CNC router makers. Can you describe a bit more fully what is required or post a pic from yur instruction manual

DJ’s Timber
5th May 2008, 08:25 AM
Could be for a laminate trim style router (http://www.makita.com.au/category.asp?ContainerID=trimmers)

Skew ChiDAMN!!
5th May 2008, 07:05 PM
Wot DJ said.

Also known by some as a 'finishing' or 'trim' router.

wheelinround
5th May 2008, 11:18 PM
Aldi also had a variable speed router for about $45 Toni

other choice is a Dremal or similar

lubbing5cherubs
9th May 2008, 10:40 PM
Mother's day scored early I got a new ozito today. Hubby is going to help me set up to play. :D
Toni