PDA

View Full Version : CNC Bandsaw



Big Shed
6th September 2008, 09:49 AM
http://www.youtube.com/watch?v=uSsQxiJSe9E (http://www.youtube.com/watch?v=uSsQxiJSe9E)Now this is change from the usual routers, mills and lathes.


http://www.youtube.com/watch?v=uSsQxiJSe9E

djfoggin
6th September 2008, 11:10 AM
was that an incra lite positioner used in that video?

Big Shed
6th September 2008, 11:16 AM
Yes it is an Incra , but I don't think it is called the UltraLite.

You can read more about this project here "http://www.cnczone.com/forums/showthread.php?t=56895"

edit

Found it, I think it is the Original, like this (http://www.woodworksupplies.com.au/category147_1.htm) one.

rodm
6th September 2008, 11:55 AM
There are some clever people around. :2tsup:

clockwork
24th September 2008, 08:47 AM
I'm the guy who built this machine. I removed the Incra positioner from an old jig that's not used anymore. It's the original Incra product - about 20 years old.

Big Shed
24th September 2008, 08:53 AM
I'm the guy who built this machine. I removed the Incra positioner from an old jig that's not used anymore. It's the original Incra product - about 20 years old.

Hi clockwork and welcome to the forum.

That is an impressive bit of work, could you tell me what blade is fitted to your bandsaw in that video?

clockwork
24th September 2008, 09:16 AM
Thanks for the compliment.

I'm using a 1 1/4 Inch Resaw King blade purchased from Laguna Tools.

The saw is a Laguna LT-18.