Boatmik
13th September 2008, 07:50 PM
Another Launching.
It is funny ... when I think about the GIS I think about a white hull. I do REALLY like white in a shapely boat.
But Jason's gorgeous blue boat has changed my mind big time. I really like white still, but this particular blue ... wow.
Also Jason has only ever done a little sailing. Looks quite the pro ... weight forward sitting on the gunwale.
So here are his emails from the building process and some pics.
Hello Michael,
After shopping around for a small sailboat design for several months, I finally decided on your Goat Island Skiff. Bought the plans from Duckworks in January, started work in late March, and I'll be ready to glue the bottom in place tomorrow.
http://farm4.static.flickr.com/3066/2852116079_aa8eff18a9.jpg
It's nice to see it finally start to look like a boat.
Anyway, I have a question regarding the sail. I would like to make the sail, but not being a sailmaker, I'm not quite comfortable launching into that project with just the info on the plan sheet. I was wondering if you have any more detailed plans or instructions that show specific reinforcements, seam placement, fabric grain orientation, etc. Then again, I may be biting off more than I can chew. Any advice would be great.
Thanks,
Jason A. LononNote the model!
http://farm4.static.flickr.com/3198/2852950122_4ea382071b.jpg
Hello Michael,
Got a question about the centerboard / center-case fit. I finished the centerboard to 341mm wide as per the plans. I also built the center-case by the plan sheet, which gives a 374mm slot for the centerboard. Is this too much play?
(This is a recurring question ... all the dimensions are right ... it is just that one is at an angle to the other! Boatmik)
http://farm4.static.flickr.com/3181/2852116385_f106f03d60.jpg
By the way, I've been meaning to post some pictures on the Aus. Woodworkers Forum, but can't seem to size them small enough to upload to their site. O well. Here are a few for your enjoyment.
Regards,
Jason Lonon
http://farm4.static.flickr.com/3095/2852116291_9fd8377cbf.jpg
AKA Tomahawk J
http://farm4.static.flickr.com/3177/2852116503_df32b48f88.jpg
Isn't that pic above so sweet! This guy really knows how to detail a boat to keep it looking really slick and compact.
But most rewarding of all ... sailing reports (hehe)
Hello Mik,
Well, my GIS is finally done.
Had her out about five times so far. These mountain lakes where I live have the most finicky winds. Constantly shifting directions and then dies.
http://farm4.static.flickr.com/3274/2852949692_88c99c7376.jpg
More downhaul required but doesn't that blue look wonderful and the place to sail!!!
One of my colleagues from the college where I teach went out with me a couple of weeks ago when there was a reasonably steady breeze. We fell in behind a 16' sloop rigged day sailor to test our speed. The GIS was hands down faster. As we closed in on them, the teenage helmsman tried in vain to start his outboard! My friend yelled "No fair! If you start that motor, we'll start paddling!"
http://farm4.static.flickr.com/3171/2852949914_30dae11a55.jpg
The mainsail looks very nice here!!
I've attached some Pictures from last Saturday's trip.
Winds 15 mph gusting to nearly 30 mph. What a ride! Took two of us on the gunwales to keep her balanced.
http://farm4.static.flickr.com/3059/2852949802_fb9ac7aceb.jpg
By the way, I am not a sailor, and have absolutely no sailing experience. Unless you count an hour and a half ride on a hobbie cat with a crazy Australian at the helm. That was 9 years ago when I was a summer camp counsellor. So, I'm cutting my teeth on the GIS.
Not having any experience to compare to, my observations may not mean a whole lot, but I am very impressed with the boat. Balance, handling, speed, everything is superb.
Regards,
Jason Lonon
AKA Tomahawk JAnd to keep flickr happy jason's GIS set (http://www.flickr.com/photos/boatmik/sets/72157607259103074/)
Also Jason' thread about the frustrations of trying to find the right boat fittings ...
http://www.woodworkforums.ubeaut.com.au/showthread.php?t=73864
It is funny ... when I think about the GIS I think about a white hull. I do REALLY like white in a shapely boat.
But Jason's gorgeous blue boat has changed my mind big time. I really like white still, but this particular blue ... wow.
Also Jason has only ever done a little sailing. Looks quite the pro ... weight forward sitting on the gunwale.
So here are his emails from the building process and some pics.
Hello Michael,
After shopping around for a small sailboat design for several months, I finally decided on your Goat Island Skiff. Bought the plans from Duckworks in January, started work in late March, and I'll be ready to glue the bottom in place tomorrow.
http://farm4.static.flickr.com/3066/2852116079_aa8eff18a9.jpg
It's nice to see it finally start to look like a boat.
Anyway, I have a question regarding the sail. I would like to make the sail, but not being a sailmaker, I'm not quite comfortable launching into that project with just the info on the plan sheet. I was wondering if you have any more detailed plans or instructions that show specific reinforcements, seam placement, fabric grain orientation, etc. Then again, I may be biting off more than I can chew. Any advice would be great.
Thanks,
Jason A. LononNote the model!
http://farm4.static.flickr.com/3198/2852950122_4ea382071b.jpg
Hello Michael,
Got a question about the centerboard / center-case fit. I finished the centerboard to 341mm wide as per the plans. I also built the center-case by the plan sheet, which gives a 374mm slot for the centerboard. Is this too much play?
(This is a recurring question ... all the dimensions are right ... it is just that one is at an angle to the other! Boatmik)
http://farm4.static.flickr.com/3181/2852116385_f106f03d60.jpg
By the way, I've been meaning to post some pictures on the Aus. Woodworkers Forum, but can't seem to size them small enough to upload to their site. O well. Here are a few for your enjoyment.
Regards,
Jason Lonon
http://farm4.static.flickr.com/3095/2852116291_9fd8377cbf.jpg
AKA Tomahawk J
http://farm4.static.flickr.com/3177/2852116503_df32b48f88.jpg
Isn't that pic above so sweet! This guy really knows how to detail a boat to keep it looking really slick and compact.
But most rewarding of all ... sailing reports (hehe)
Hello Mik,
Well, my GIS is finally done.
Had her out about five times so far. These mountain lakes where I live have the most finicky winds. Constantly shifting directions and then dies.
http://farm4.static.flickr.com/3274/2852949692_88c99c7376.jpg
More downhaul required but doesn't that blue look wonderful and the place to sail!!!
One of my colleagues from the college where I teach went out with me a couple of weeks ago when there was a reasonably steady breeze. We fell in behind a 16' sloop rigged day sailor to test our speed. The GIS was hands down faster. As we closed in on them, the teenage helmsman tried in vain to start his outboard! My friend yelled "No fair! If you start that motor, we'll start paddling!"
http://farm4.static.flickr.com/3171/2852949914_30dae11a55.jpg
The mainsail looks very nice here!!
I've attached some Pictures from last Saturday's trip.
Winds 15 mph gusting to nearly 30 mph. What a ride! Took two of us on the gunwales to keep her balanced.
http://farm4.static.flickr.com/3059/2852949802_fb9ac7aceb.jpg
By the way, I am not a sailor, and have absolutely no sailing experience. Unless you count an hour and a half ride on a hobbie cat with a crazy Australian at the helm. That was 9 years ago when I was a summer camp counsellor. So, I'm cutting my teeth on the GIS.
Not having any experience to compare to, my observations may not mean a whole lot, but I am very impressed with the boat. Balance, handling, speed, everything is superb.
Regards,
Jason Lonon
AKA Tomahawk JAnd to keep flickr happy jason's GIS set (http://www.flickr.com/photos/boatmik/sets/72157607259103074/)
Also Jason' thread about the frustrations of trying to find the right boat fittings ...
http://www.woodworkforums.ubeaut.com.au/showthread.php?t=73864