My kitchen

[Cosky]

My new kitchen i designed built and installed

(http://thumb19.webshots.net/t/69/569/0/94/43/2609094430101150319UFCcVU_th.jpg)
http://thumb19.webshots.net/t/69/569/0/94/43/2609094430101150319UFCcVU_th.jpg (http://home-and-garden.webshots.com/photo/2609094430101150319UFCcVU)
http://thumb19.webshots.net/t/55/755/6/8/74/2640608740101150319uqtyfU_th.jpg (http://home-and-garden.webshots.com/photo/2640608740101150319uqtyfU)

[jefferson]

Cosky

You gotta do better than that. Please explain the build and installation! Otherwise, none of us are any the wiser!

Jeff

[Cosky]

door fronts are made from 12 mdf with V groves routered vertical, but stopped 50mm from top and bottom, so when you open the doors you dont see v holes in the top edge, then i put 6mm buildups on the fromt of the doors, to give then that sunken panel look.
carcase is made from white 16mm HMR chipboard, kicker made from solid pine.
Tops made from HMR chipboard, with soild pine timber edging, bullnosed 33mm thick, laminate on the top with bullnose sunk lower than the laminate to grove a nice line.
I removed the old Jarrah floor boards as they were totally shot, restumpped the floor joysts, layed HMR chipboard down the tiled it.:2tsup:

[jefferson]

Cosky,

What about the corner cupboards? That would be the hard part, so please explain!

Jeff

[Woodlee]

Love the angled drawers good use of space .
I checked out your website from a link in a previous post ,you are a very talented person .

Kev.