Gaza 11th April 2009, 01:08 PM where can buy parts in Aust for vacum bag set up, i know joe site has parts but was after a local supplier.
Sprog 11th April 2009, 03:29 PM where can buy parts in Aust for vacum bag set up, i know joe site has parts but was after a local supplier.
http://www.carbatec.com.au/vacuum-clamps/roarockit-thin-air-press-kits
Gaza 11th April 2009, 04:24 PM i need a set up to do panels 2400x900 or so, dont think hand pump would do it.
cheers
Harry72 11th April 2009, 06:36 PM www.yareus.com.au
www.rivergumtimbers.com.au
www.woodnworkshop.com.au
Compliments of Geoff Birtles and AWR, was a write up in the last issue!
Gaza 11th April 2009, 07:13 PM thanks harry,
might go and buy the mag
stevemc32 12th April 2009, 12:33 PM Are you planning on building the vac setup yourself Gaza.
A fridge pump works a treat and you can usually find one free, though I did spend about 30 bucks I think on a vac switch and lock on connector from Joe Woodworker. The rest of the necessary gear can be picked up at the local hardware.
| |