Librarian
9th May 2009, 04:32 PM
ACROSS FLAT DIMENSIONS OF HEX HEADED BOLT: CLICK HERE (http://www.woodworkforums.com/Library/hexhead.htm)
Shaft Diameter to maximum and minimum sizes in both inches and mm
COMPLETE PENMAKERS CHART FOR DRILLS AND BUSHES: CLICK HERE (http://www.woodworkforums.com/Library/penmakeguide1.htm)
Match a pen with the mandrel, bushes, drill and blank size.
Chart made by forum member Artme
CONVERSION TABLES: CLICK HERE (http://www.woodworkforums.com/Library/tables.htm)
Automatically calculate all sorts of stuff.....
Linear, area, volume, weight pressure angle, temperature, wind chill and more.
Also conversion tables for: Length, area, capacity & weight. Imperial to metric and back etc.
DRILL SIZE CALCULATOR: CLICK HERE (http://www.woodworkforums.com/Library/drillsize.htm)
Find drill sizes equivalents by:
Provides drill sizes in 1/64 fractions of inch, with equivalents in decimal, wire number/letter and metric.
FUEL ECONOMY: CLICK HERE (http://www.woodworkforums.com/Library/FuelCalc.htm)
Calculate mpg, ltrs per 100k, etc. (imperial measure not US)
GEOMETRIC: CLICK HERE (http://www.woodworkforums.com/Library/GeomCalc.htm)
Calculate: Area of Sphere, Cone, Circle.
SCREW / DRILL SIZES: CLICK HERE (http://www.woodworkforums.com/Library/screwdrillsize.htm)
WOOD SCREWS - Recommended Drill Sizes For use on Australian Hardwoods also
Wood & Self Tapping Screw Data Use this chart to convert screw diameter to screw gauge number.
TEMPERATURE: CLICK HERE (http://www.woodworkforums.com/Library/TempCalc.htm)
Convert: Celsius - Fahrenheit - Celsius - Kelvin, etc
A BOX MAKERS' RATIO WORKSHEET
104710
This spreadsheet was developed on the forum as an aid to the design of boxes in pleasing dimensional ratios.
Contributors were: Big Shed - Barry White - Switt775 - Pusser - Watson
Shaft Diameter to maximum and minimum sizes in both inches and mm
COMPLETE PENMAKERS CHART FOR DRILLS AND BUSHES: CLICK HERE (http://www.woodworkforums.com/Library/penmakeguide1.htm)
Match a pen with the mandrel, bushes, drill and blank size.
Chart made by forum member Artme
CONVERSION TABLES: CLICK HERE (http://www.woodworkforums.com/Library/tables.htm)
Automatically calculate all sorts of stuff.....
Linear, area, volume, weight pressure angle, temperature, wind chill and more.
Also conversion tables for: Length, area, capacity & weight. Imperial to metric and back etc.
DRILL SIZE CALCULATOR: CLICK HERE (http://www.woodworkforums.com/Library/drillsize.htm)
Find drill sizes equivalents by:
Provides drill sizes in 1/64 fractions of inch, with equivalents in decimal, wire number/letter and metric.
FUEL ECONOMY: CLICK HERE (http://www.woodworkforums.com/Library/FuelCalc.htm)
Calculate mpg, ltrs per 100k, etc. (imperial measure not US)
GEOMETRIC: CLICK HERE (http://www.woodworkforums.com/Library/GeomCalc.htm)
Calculate: Area of Sphere, Cone, Circle.
SCREW / DRILL SIZES: CLICK HERE (http://www.woodworkforums.com/Library/screwdrillsize.htm)
WOOD SCREWS - Recommended Drill Sizes For use on Australian Hardwoods also
Wood & Self Tapping Screw Data Use this chart to convert screw diameter to screw gauge number.
TEMPERATURE: CLICK HERE (http://www.woodworkforums.com/Library/TempCalc.htm)
Convert: Celsius - Fahrenheit - Celsius - Kelvin, etc
A BOX MAKERS' RATIO WORKSHEET
104710
This spreadsheet was developed on the forum as an aid to the design of boxes in pleasing dimensional ratios.
Contributors were: Big Shed - Barry White - Switt775 - Pusser - Watson