Free Postage until end of Wood Show at Brisbane

[TheSandpaperMan]

To coincide with the Timber and Working with Wood Show in Brisbane, we are offering FREE POSTAGE on all orders placed on our website, www.thesandpaperman.com.au until midnight Monday, 25th May, 2009.

You need to enter a Coupon down the bottom of Checkout Page, and the postage charges will be deleted.

Coupon is BRISWW09

Happy shopping!

[Wongdai]

Hi there,

Will you be stocking belts for Multitools in the future?

[yjnb]

I would also be after the 2 inch multitool belts, particularly if belts suitable for sharpening were available

Regards,

James

[TheSandpaperMan]

Yes, we do stock Multitool belts. They just haven't been added to our website yet.

What size Multitool belt are you looking for? 50 x 1220 mm. or 50 x 914 mm? We have got the coarser grades - 36 grit to 80 grit.

Would you like these listed on our website, or are you after finer grades which we can obtain for you?

[yjnb]

I have the multitool on order, so will confirm the belt size when it arrives. I have been very happy with the abrasives I ordered from you in the past and would like to see the belts on the website. What grits are you able to source, for example would 400 be available, and what would be the minimum order?

thanks for the prompt reply by the way.

Regards

James

[TheSandpaperMan]

We have listed on our website, under the category "Belts" both the 50 x 914 mm, and 50 x 1220 mm in the grades 36 to 80 grit, which we currently keep in stock.

Yes, finer grades are available, up to 600 grit, so if you let us know what grits you are after, we will order those and put them on our website.

[Wongdai]

Hi there

For me the 916mm length is good, but I need much finer grit. My current finest grit is 4000. Can you get 6000?

I also use 80, 120 & 240 grits, some between these and 4000 would be useful.

regards

Wongdai

[TheSandpaperMan]

We can get Micro-Mesh belts equivalent to 8000 Micro-Mesh grading, which is equivalent to 3 Micron. These are something we would have to order, but can certainly do so. Cost per belt would be $8.68, including GST.

Shortly, we will be stocking 50 x 914 mm up to 600 grit, and as stated above, can order Micro-Mesh up to 8000 grit Micro-Mesh grading.