verdigris effect for a bowl?

[bellyup]

Hello all,
I am going to attempt a large redgum burl platter for the M.I.L.'s birthday.
I have an idea that I would like to contrast the colour of the burl with a "verdigris" coloured and textured (am making a chatter tool) band on the rim. Would anyone know how I might achieve that verdigris effect?.
Oh, and another quick question - What is the filler of choice to fill the cavities in redgum burl. I would like the platter to have a semi gloss finish.
Your help as always is very much appreciated.
Thanks,
Bruce.

[artme]

Experiment with some paints, or dyes or both.There are paints available, most likely from craft shops, that imitate metal patinas very well.

Suggest filler be epoxy mixed with fine Redgum dust to give good colour, or just charcoal, Again, experiment a bit and see what you like. Have fun.:2tsup:

[rsser]

I've had reasonable results with coffee grounds and epoxy, 50:50. And the current AWR has a piece on epoxy coloured with Feast Watson Prooftint.

Can't help on the verdigris thing, but Richard Raffan has done some striking things with it and may have done an article on it.

[Manuka Jock]

Some of the old milk paints had a verdigris look about them
They may be available commercially , or the recipe maybe on the net

[rsser]

Google is your friend. Try "verdigris paint acrylic"

[bellyup]

Thanks guys,
Couldn't find anything from monsieur Raffan on the net though Porters paints have some stuff on their site that may suit. Thanks for the help,I'll give the coffee and Araldite a go.
Bruce.

[Mulgabill]

Hey Bellyup!
Try this. http://www.artmaterials.com.au/index.php?cPath=200_2204
Their service is great! (No association etc ... just a satisfied customer)

[bellyup]

Thanks Russell,
That looks like a great place to start. Much appreciated.
Bruce.:2tsup:

[robbiebgraham]

Hi Bruce,
I use Porters paints verdigris/patinas; instant iron and also the coper, they are very good products.
Good luck,
Cheers, Robbie

[bellyup]

Thanks Robbie,
Any tips on how you apply it for best results? Which colour/product did you go with? Have you tried it on a rough surface?
Thanks,
Bruce.

[robbiebgraham]

Thanks Robbie,
Any tips on how you apply it for best results? Which colour/product did you go with? Have you tried it on a rough surface?
Thanks,
Bruce.
Hi Bruce,
I have used both the coper and the Instant iron. I have had great results with both but I love the effects you get with the instant iron. I play around with the application eg; sponge on the iron and acid, which gives a textured affect or spraying water on the rust after the acid is applied.
I have attached a couple of links to some of my web pages showing pieces with these products.
Cheers,
Robbie
http://www.wildwoodgallery.co.nz/rust.htm
http://www.wildwoodgallery.co.nz/ancient.htm
http://www.wildwoodgallery.co.nz/woodturning.htm

[Mulgabill]

Hey Robbie!
I have seen your fantastic work! With your finishing talents I'm thinking that there is a opportunity for you to publish a book on some of your embellishing tip and tricks ??:;
Any way keep up the great work.

[bellyup]

Great stuff Robbie,
Thanks for the info. I'll post some pics.when I get started.
Bruce.