Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 7 of 7
  1. #1
    Join Date
    May 2001
    Location
    Queanbeyan
    Age
    60
    Posts
    1,252

    Default 9yo daughter looking for inspiration

    My 9yo has come home with a project to make something they have never tried before and to document the process over the next 2 months. In her wisdom, and obviously inspired by her highly skilled and artistic dad , she has decided to create something through woodcarving.

    So far she has come up with the idea of working with soap first to get practice and that's about it. She has started to go through all my woodworking books to see if she can find some inspiration.

    Are there any suggestions for woods to use? I'm thinking something that has a hardness somewhat less than Penda, and something more than balsa wood.

    Any suggestions on using handtools as opposed to a Dremel?

    Any suggestions in general?

    Cheers
    There was a young boy called Wyatt
    Who was awfully quiet
    And then one day
    He faded away
    Because he overused White


    Floorsanding in Canberra and Albury.....

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    11,464

    Default

    Radiata pine is cheap and carves easily with sharp chisels and gouges.
    It could be whittled with appropriate knives

    An approprite project might be a potstand etc.
    e.g. A piece of 12mm pine cut out to a suitable outline such as an animal silhouette with a hand coping saw. Followed by some a little bit of light relief carving for character.
    Regards, Bob Thomas

    www.wombatsawmill.com

  4. #3
    Join Date
    Nov 2004
    Location
    Holland Park, Brisbane QLD
    Age
    48
    Posts
    361

    Default

    Hi Mick

    It's a hard project! I actually bought some chisel attachments for the angle grinder and found that my first carving project was much easier with those to slice through the timber like butter. In comparison, I tried my hand with the abortech carver (wheel like attachment with twisted teeth) and it was much harder to control. There were bits of wood flying everywhere and my wrists were not strong enough to really control the direction/angle I wanted to achieve. Maybe I am a girl with weak wrists and your 9 yr old might be better at it. As a first go, I would opt for the chisel attachments and leave the grinding wheel for later. Don't forget to slip on a pair of safety glasses!

    Cheers
    Dan

  5. #4
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    63
    Posts
    13,360

    Default

    Huon Pine. The cheddar cheese of wood.

    If she practises on soap, the huon pine won't be that different to carve and she'll probably enjoy the scent. IMHO it's the nicest wood to learn hand carving on... tools should their edges longer and, where her skills fail, a bit of 120grit will clean up nicely.
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  6. #5
    Join Date
    Aug 2003
    Location
    Perth (NOR)
    Age
    78
    Posts
    1,386

    Default

    Jelutong, carvers favourite......soft, light, relatively cheap............used by many carvers.

  7. #6
    Join Date
    Jun 2003
    Location
    queensland
    Age
    77
    Posts
    1,069

    Default

    The Bob Thomas advice is good.Keep it simple,nice slow hand tools a couple of small chisels for detail and the 9yo will have a ball.(plus a good report card).
    Regards Terry.

  8. #7
    Join Date
    Nov 2005
    Location
    Denistone, NSW.
    Age
    55
    Posts
    11

    Thumbs up

    I know this is a woodwork forum, however......

    I suggest that you start your daughter off with soapstone. It is available in craft stores. I remember that my first attempt at carving was in school with soapstone.

    After leaving school I purchased several pieces of soapstone that I carved and are still on display in my home today. Soapstone is easy to carve and you are able to carve with relatively simple tools.

    In some respects carving soapstone at a younger age has probably lead me to carving in wood at a later age.

    Good Luck with the carving.

Similar Threads

  1. Help find our daughter!!
    By Wild Dingo in forum NON WOODWORK
    Replies: 64
    Last Post: 1st October 2005, 11:03 PM
  2. A Father Daughter Talk
    By graemet in forum WOODIES JOKES
    Replies: 7
    Last Post: 30th September 2005, 06:11 PM
  3. A present from daughter
    By Corunetes in forum NON WOODWORK
    Replies: 13
    Last Post: 22nd May 2005, 07:29 PM
  4. Irish Daughter
    By Baz in forum WOODIES JOKES
    Replies: 0
    Last Post: 18th January 2005, 08:28 PM
  5. Daughter rules
    By Iain in forum WOODIES JOKES
    Replies: 8
    Last Post: 10th October 2001, 05:01 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •