Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
Thread: First attempt at a Torso
-
6th April 2015, 02:52 PM #1Senior Member
- Join Date
- May 2007
- Location
- Sydney
- Posts
- 145
First attempt at a Torso
I planning a house sign/family crest based on the first image below which is associated with the McFarlane surname. This is ridiculously ambitious because I have only carved a little and nothing to do with humans or other animals, but what is one to do..?
I modelled this a couple of times in clay first to try and understand the form. The carved result is shown here - the whole torso is 130mm from top of hair to bottom of waist. Still very two dimensional as I haven't fully capitalised on the whole depth of the wood. I had hoped to show the twist in the lower torso and the outward thrust of the lower chest more clearly as well. The face is pretty blank but I didn't have very high hopes for a first attempt. I haven't tackled the hands and sword yet.
I plan to do this a couple more times until I feel I would be happy with it hanging on my wall. Critique/suggestions always welcome
DSCF3377.JPGDSCF3373.jpgDSCF3375.JPGDSCF3374.JPG
-
6th April 2015 02:52 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th April 2015, 08:53 PM #2
..great first attempt Yx...IMO you're doing it right if you start with models first..
my only suggestion would be plasticene rather than clay..
what if the hokey pokey is really what it's all about?
-
6th April 2015, 10:51 PM #3Senior Member
- Join Date
- Mar 2012
- Location
- Perth
- Posts
- 470
You've picked off a hard one for your first attempt but your doing well, maybe just sand down the muscle edges a bit towards the end so they look more "under the skin". Good work.
-
7th April 2015, 10:17 PM #4Senior Member
- Join Date
- May 2007
- Location
- Sydney
- Posts
- 145
Gents,
Thanks so much for the encouraging words.
Ufoot - interesting that you prefer plasticise, I find it very stiff and my little girly hands get fatigued - do you heat it first or something?
Rob - thanks for the tip, though I don't relish the idea of sanding, I can see how it may be necessary here to get something that passes as 'skin'
Cheers
Coxy
-
12th April 2015, 07:18 AM #5
-
15th April 2015, 06:39 PM #6Senior Member
- Join Date
- Jul 2008
- Location
- Sydney
- Posts
- 299
Hi Coxy, looks like you're on the right track. I have also used plasticene for making a model to sort out the 3D issues of a new project, before starting to carve. In winter the plasticene stays a bit hard at first, but after working it a little, it does become very kneadable and easy to work with. In summer I find that the opposite applies, it can be too soft, so then I need to make sure that the armature (the internal supporting structure) is a bit more ... mmm ... well, supportive.
Have you thought about joining a local woodcarving group to get some advice and/or tips? Noting that you are in Sydney, there is the Sydney Woodcarving Group who hold carving sessions at four locations, namely Epping, Chester Hill, Lilly Pilly and Shellharbour. See their website at www.sydneywoodcarving.org.au,
I have sent you a PM with some more detail on the SWG. Cheers, Peter
-
19th April 2015, 09:32 PM #7Senior Member
- Join Date
- May 2007
- Location
- Sydney
- Posts
- 145
Claude - thanks for the kind words, I appreciate them.
Goguppy, The clay is cheap enough, I find it on the ground locally. It needs to be kept moist when working on a model or it will crack very quickly but otherwise it suits my needs. Sent you a pm.
Cheers
Coxy
-
22nd April 2015, 08:03 PM #8GOLD MEMBER
- Join Date
- Jan 2013
- Location
- Tasmaniac
- Posts
- 1,470
Good luck with the project.
Just couldn't help but notice on that first picture. It is a shame that the sword and arm of the bloke holding it is obscuring the text written on the belt in the background.
What it says is anyone's guess. The _ _ _ _ _ defend?
-
22nd April 2015, 10:47 PM #9Senior Member
- Join Date
- May 2007
- Location
- Sydney
- Posts
- 145
G'Day Artful,
Thanks for your interest. No need to guess at the inscription, I can tell you it says 'This I'll defend', which I believe is the motto off the McFarlane clan.
Regards
Coxy
Similar Threads
-
Torso on a mission
By Robthechisel in forum WOODCARVING AND SCULPTUREReplies: 28Last Post: 29th July 2013, 12:44 AM -
Torso
By Robthechisel in forum WOODCARVING AND SCULPTUREReplies: 23Last Post: 6th February 2013, 08:49 PM -
Nude Female Torso
By Cliff Rogers in forum WOODCARVING AND SCULPTUREReplies: 13Last Post: 2nd September 2011, 09:10 AM -
My very 1st attempt
By Dodgyboy in forum WOODTURNING - PEN TURNINGReplies: 10Last Post: 24th June 2009, 09:43 AM -
Torso
By Scally in forum WOODCARVING AND SCULPTUREReplies: 2Last Post: 28th October 2006, 12:37 AM