Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Cedar Dragonfly Dishes
-
9th May 2013, 05:55 AM #1GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 3,543
Cedar Dragonfly Dishes
Western Red Cedar fence post, 9 x 9 x 29cm each. Straight dish walls, 10mm thick, flat bottom 12mm thick. Wings on the sides and legs on the bottom. 2X Liquitex glass varnish, matte on the eyes. I wanted a darker iridescent green and soot-black eyes. Got neither. Very loosely based on a dragonfly drawing done by the late Jim Gilbert in Learning By Desighning, vol 1.
My D2 is preggers with twins, I know where these are going!
-
9th May 2013 05:55 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
9th May 2013, 08:28 PM #2
They are very cute RV!
Twins! Oooo double the fun on the way!
-
10th May 2013, 07:07 AM #3GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 3,543
Thanks featherwood. There's a great deal of endgrain carving. Even though I have a dedicated carving bench to do endgrain, it still came up a bit rougher than I needed. If you look carefully, you'll see that the dishes got the RV branding on the tip of the lower left wing (bottom/back end).
The two dishes are more alike than any other pair of carvings that I've done. The left/right symmetry is the best I've done so far. I'm satisfied that it just takes a heap of diligence and I am not there yet.
Can you see easily how to do a fat beetle dish with the elytra/shell wings coming off as a lid?
-
10th May 2013, 03:25 PM #4Senior Member
- Join Date
- Mar 2012
- Location
- Perth
- Posts
- 470
I like the way you do unique but functional carvings RV, I fear you won't have much time for carving when these twins arrive, good luck.
-
11th May 2013, 06:34 AM #5GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 3,543
Thanks Rob. Carving something which is borderline functional is quite satisfying.
Throughout the Pacific Northwest Native cultures, small dishes, "feast dishes," are not uncommon. Usually to hold some real treat/delicacy such as the oil rendered from a greasy little marine fish called an Oolican.
After seeing the original drawing (no implication about a dish), I wondered how well I could wrap the thing around a piece of wood. As I said to featherwood, there are a couple of technical achievements for me in those dishes.
Similar Threads
-
Lidded Candy Dishes
By Bellsy in forum WOODTURNING - GENERALReplies: 10Last Post: 23rd December 2012, 12:03 AM -
Dragonfly
By clubbyr8 in forum PHOTOGRAPHYReplies: 3Last Post: 8th November 2011, 07:19 AM -
Help with soap dishes (especially in Brisbane)
By ElizaLeahy in forum WOODWORK - GENERALReplies: 7Last Post: 14th January 2011, 09:23 PM -
Danger of men doing dishes
By wheelinround in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 7Last Post: 29th January 2010, 04:05 PM -
Any takers for washing the dishes?
By Ian007 in forum NON WOODWORKReplies: 23Last Post: 27th March 2006, 01:19 PM