Results 1 to 13 of 13

Thread: Say cheese

  1. #1
    Join Date
    Jan 2012
    Location
    Littlehampton, SA
    Posts
    300

    Default Say cheese

    Retirement means more time in the shed, making stuff to give away. I started with an idea to decorate a cheese board and got a bit carried away with designs.
    Attached Images Attached Images

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Apr 2011
    Location
    McBride BC Canada
    Posts
    3,543

    Default

    I do like the stippled background in #3 (?).
    That is a very rare design element in this day and time.

    Cheese boards are good = they can deliberately slow down a meal and boost the conversation.
    Well done.

  4. #3
    Join Date
    Jan 2015
    Location
    Ponchatoula, LA, USA
    Posts
    342

    Default

    Nice work on all these. Looks like good clean cuts on all.

    Claude

  5. #4
    Join Date
    Nov 2011
    Location
    Abermain
    Posts
    30

    Default

    Crunchie
    Nice design
    Could you advise the size and the finish you will use, please

  6. #5
    Join Date
    Jan 2012
    Location
    Littlehampton, SA
    Posts
    300

    Default

    Quote Originally Posted by nivlek View Post
    Crunchie
    Nice design
    Could you advise the size and the finish you will use, please
    Hi Nivlek. The boards are 380mm X 150mm. The handle is 50mm wide. I'm not sure what I'd use to finish them. I have used vegetable oils (Canola, Olive) but they make it go yellow, as does "Timber Bench Top Oil" that I get from the Big Green Toy Store.

    I bought the timber as Huon Pine years ago and stacked it away in clamps and only found them when I moved house (Moved shed!!!). When I planed the timber I thought it had a bit too much grain for Huon and didn't quite smell the same. Now, the more I work with it, the more confused I am. It has a small bit of Huon - type odour, has very close growth rings and feels very smooth from 240 grit abrasive but I don't have enough experience with other pines to think that it may be some other type.

    If someone on the forum is an "expert", I'd happily post a short length to try to identify it.

  7. #6
    Join Date
    May 2011
    Location
    FRANCE
    Age
    59
    Posts
    3,495

    Default

    nice job Ceynchie

  8. #7
    Join Date
    Jan 2015
    Location
    Ponchatoula, LA, USA
    Posts
    342

    Default

    [QUOTE=Crunchie;2147085]Hi Nivlek. The boards are 380mm X 150mm. The handle is 50mm wide. I'm not sure what I'd use to finish them. I have used vegetable oils (Canola, Olive) but they make it go yellow, as does "Timber Bench Top Oil" that I get from the Big Green Toy Store.

    The finish needs to be food safe. Two that come readily to mind are butcher block finish and mineral oil (US)... I believe in the UK it is called Liquid Paraffin and is sold at the Chemist as a laxative. If you aren't sure, you can ask the chemist what kind of food-safe oil he/she recommends. Robson Valley (Brian) will tell you how to apply it. I'll drop him a note about this.

    Claude

  9. #8
    Join Date
    Apr 2011
    Location
    McBride BC Canada
    Posts
    3,543

    Default

    Any oil finish wil appear to discolor the wood because you are replacing the surface wood air with oil.

    I use top grade olive oil as a finish on carved spoons (70) and forks(30).
    That's because I have lots of it and I know it will not go rancid. Use the veg oil of your choice.

    Preheat your kitchen oven to 325F, no hotter.
    On a cake rack, over a sheet pan, slather your boards with oil.
    Into the oven for 3 mins 30 sec and out.

    (I'm going to guess from experience that this won't work well at all.
    (You're going to have to give the bigger pieces of wood 2, maybe 3, heat treatments.
    (When this works, you will see bubble of hot wood air coming out through the oily surface.

    The wood air heats and expands. Out, as it cools, the contracting wood air sucks the oil finish down into the wood.
    This is an application of Charles' Gas Law of Physics with predictable results.

    I carved a shallow kitchen dish for wet scrub pads and brushes from Betula birch.
    I did the oven coating process with straight bee's wax.
    That dish is waterproof for time to come
    = = = =
    Do youself a favor, OK? Resist the urge to touch the oily boards @325F with your fingers.
    Remind yourself that you are not in the kitchen to fry chips. Let them cool, add more oil.

  10. #9
    Join Date
    Jan 2012
    Location
    Littlehampton, SA
    Posts
    300

    Default

    Thanks, Brian. I'll give it a go.

  11. #10
    Join Date
    Apr 2011
    Location
    McBride BC Canada
    Posts
    3,543

    Default

    You're welcome. I've read a lot of positive testimonials since I ran across this process, myself.
    There's so little air (oxygen) in the wood that veg oils can't go rancid.

    Plus, the surface wood was heated to 325F. So to move any oil, you have to reheat to at least 325F.
    Hot water and detergent on the sink for washing up cannot touch the oil finish.

  12. #11
    Join Date
    Jan 2012
    Location
    Littlehampton, SA
    Posts
    300

    Default

    Here is the latest in this "series" of cheese boards.
    IMG_2224.jpg

  13. #12
    Join Date
    Apr 2011
    Location
    McBride BC Canada
    Posts
    3,543

    Default

    That design concept fits into my head. Well thought out.
    Brian

  14. #13
    Join Date
    Jan 2013
    Location
    Tasmaniac
    Posts
    1,470

    Default

    Quote Originally Posted by Crunchie View Post
    Hi Nivlek. The boards are 380mm X 150mm. The handle is 50mm wide. I'm not sure what I'd use to finish them. I have used vegetable oils (Canola, Olive) but they make it go yellow, as does "Timber Bench Top Oil" that I get from the Big Green Toy Store.

    I bought the timber as Huon Pine years ago and stacked it away in clamps and only found them when I moved house (Moved shed!!!). When I planed the timber I thought it had a bit too much grain for Huon and didn't quite smell the same. Now, the more I work with it, the more confused I am. It has a small bit of Huon - type odour, has very close growth rings and feels very smooth from 240 grit abrasive but I don't have enough experience with other pines to think that it may be some other type.

    If someone on the forum is an "expert", I'd happily post a short length to try to identify it.


    Hi Crunchie. If you have doubts about it being huon then I'd say it could be celery top pine. Carving those motifs on the handles should have released the huon smell. Huon and Celery can look very similar.

Similar Threads

  1. Hard Cheese
    By pmcgee in forum HAND TOOLS - UNPOWERED
    Replies: 12
    Last Post: 16th April 2015, 11:41 PM
  2. Cheese Burl +
    By wheelinround in forum WOODWORK - GENERAL
    Replies: 6
    Last Post: 1st January 2015, 07:56 PM
  3. Cheese Board
    By Makka in forum WOODWORK - GENERAL
    Replies: 4
    Last Post: 25th June 2012, 02:39 PM
  4. Say Cheese...
    By Funshots in forum G'day mate - THE WELCOME WAGON -Introduce yourself
    Replies: 3
    Last Post: 23rd June 2011, 05:26 PM
  5. Cheese Knives
    By mick61 in forum WOODTURNING - GENERAL
    Replies: 5
    Last Post: 8th March 2010, 12:31 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •