Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 13 of 13
Thread: Luncheon is served...
-
25th April 2012, 12:43 PM #1SENIOR MEMBER
- Join Date
- Jul 2009
- Location
- Waitpinga
- Posts
- 835
Luncheon is served...
This one is the relsult of another one of nature's special gifts.
Its a rare thing to find a natural crook with mass in the right place for a carving AND one side straight and long enough to make the shaft of a cane. What is a little more common is the crook element by itself. That's what I found in this piece of pink gum.
I carved the frog from a small limb that was sticking out and attached a piece of Stringy Bark (I've heard it called Australian Oak) for the shaft. The spacers are Kangaroo Thorn and Huon Pine. I call it Luncheon is Served...
-
25th April 2012 12:43 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
25th April 2012, 03:55 PM #2GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 3,543
I could lean on that all day long. It has a "comfortable" look about it, like a cane that you've used for 40 years. I like the accent of the spacers, too = sets off the carvings.
And, Whittling, you know that I'm fond of frogs, too.
-
25th April 2012, 09:14 PM #3SENIOR MEMBER
- Join Date
- Jul 2009
- Location
- Waitpinga
- Posts
- 835
Thanks RV. This is one piece for which nature deserves a big piece of the credit. They are not common, but when they come along these natural wood shapes give a carver an incredible 'leg up'.
And you're right... as an added bonus it happens to be very comfortable to use.
-
27th April 2012, 01:51 AM #4Senior Member
- Join Date
- Mar 2012
- Location
- Perth
- Posts
- 470
RV, your spot on, it does have a very comfortable look about it.
Whittling, I might have to come down your way when I'm in S.A. later in the year and buy one of your sticks, they are so original.
-
27th April 2012, 11:49 AM #5SENIOR MEMBER
- Join Date
- Jul 2009
- Location
- Waitpinga
- Posts
- 835
Hi Rob,
You'd be welcome... Some sticks are the result of patterns I've developed and are therefore repeatable so some extent. Other's like this one are one-offs as they rely on a contribution from nature which is unlikely to ever be repeated.
PM me when you know your plans and I'll send you contact details.
Maybe we can work at getting you some timber that's a little more interesting to work with than pinus.
.
-
27th April 2012, 01:57 PM #6Senior Member
- Join Date
- Mar 2012
- Location
- Perth
- Posts
- 470
Thanks, I'll do that, I think I need to have another shot at the Jelutong I have. Do you personally use mostly knifes when your carving it or a combination of knife and chisels.
I bought some pretty good Flexcut knifes Recently, still learning to use them.
-
28th April 2012, 11:27 AM #7SENIOR MEMBER
- Join Date
- Jul 2009
- Location
- Waitpinga
- Posts
- 835
Hi Rob, My tool use has changed over the years. When I first started the only thing I had was a Swiss Army knife and I just about wore the blades out on that. Then I 'graduated' to using other quality 3 and 4 bladed pocket knives and for a long time I used a blade about 90% of the time. The remainder was split between a half dozen chisles.
More recently, I've taken to using power more. There's two reasons for this. Firstly, as the demand for stuff increases its getting harder to keep up. In essence I'm carving against a clock and power helps speed this process up. Secondly, as I get older my joints are feeling the pressure and power takes some of this strain off me. Having said that, I still think that one should learn the 'basics' with a blade and a very few chisles first. Once the principles are firmly established, if you feel so inclined, by all means investigate some power alternatives. I run two schools in 'whittling' which I define as carving with the work in one hand and the tool in the other (as opposed to bolting or clamping the work in some way). The first workshop deals with just a blade. Eight to twelve months later the second workshop introduces 3 chisels. My students are in their third year before I mention power alternatives.
-
29th April 2012, 01:04 AM #8Senior Member
- Join Date
- Mar 2012
- Location
- Perth
- Posts
- 470
Thanks for the advice Whittling, I have a Dremel now with carving attachments which I find very good. I have never been to any classes, just trying to learn by reading and watching you tube videos ect. I do feel I'm improving each time I carve but need to source some better timber. Is American white oak any good for carving?.
-
29th April 2012, 10:19 AM #9SENIOR MEMBER
- Join Date
- Jul 2009
- Location
- Waitpinga
- Posts
- 835
[QUOTE=Robthechisel;1480554] Is American white oak any good for carving? /QUOTE]
Don't know that I've used 'white' Oak but if its anything like the American oak I have used, it has a strong fiberous grain and doesn't like being cut cross grain much. You need to pay attention to your tool edge more than usual and be prepared to go slow with it or you risk tearing. I struggled to get fine detai with it. Having said that, I've seen some remarkable stuff done in oak so it must be possible, but I'd suggest its not the easiest of woods to work with. Perhaps some others with more experience with it will have a comment.
-
7th May 2012, 10:49 PM #10
I dont know about the oak but I do know youll need to be gentle with the Dremel, I burned out 3 before investing in a Foredom, tried to do work that was too heavy for the unit.
-
7th May 2012, 11:42 PM #11SENIOR MEMBER
- Join Date
- Jul 2009
- Location
- Waitpinga
- Posts
- 835
Just a quick post script on this one... I had a show this weekend and I took the frog and his lunch along. I put what I thought was a ridiculous price on him because I really didn't want to sell him quite so soon after making him and this was my way of hanging onto him for a while.
Yeah well.... he sold almost straight away. This is now the second time this has happened to me... both sticks had frogs on the handle. Maybe I need to start paying more attention to the froggy enthusiasts out there....?
-
8th May 2012, 01:51 AM #12GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 3,543
Congratulations. Try to finish another before you croak.
-
8th May 2012, 05:02 PM #13Senior Member
- Join Date
- Mar 2012
- Location
- Perth
- Posts
- 470
You'd better jump to it and leap in while the goings good.
Similar Threads
-
dinner is served
By Wongo in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 26Last Post: 17th July 2006, 05:44 PM -
16 Reasons Why Alcohol Should Be Served At Work...
By normell in forum WOODIES JOKESReplies: 1Last Post: 22nd November 2005, 10:14 AM -
Are You Being Served Sir?
By kando in forum WOODWORK - GENERALReplies: 13Last Post: 4th February 2005, 06:02 AM