Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 25
Thread: Rust on chisels
-
30th November 2006, 12:03 AM #1
Rust on chisels
I'm ashamed to admit that some of my Pfeil chisels have got rust on them. I got them out the other night, for the first time in more than two years. They have been stored some in a roll, and some in a box.
Any suggestions on how to clean them up and then how to protect them in the future?
-
30th November 2006 12:03 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th November 2006, 01:18 AM #2
They seem to have little or no pitting. Try polishing them with crocus cloth (very fine purple grit). For protection, considering spraying with WD-40, or rub with wax, e.g. candle.
JoeOf course truth is stranger than fiction.
Fiction has to make sense. - Mark Twain
-
30th November 2006, 01:58 AM #3GOLD MEMBER
- Join Date
- Oct 2003
- Location
- Sydney,Australia
- Posts
- 3,157
Yes to crocus paper or jewellers rouge.
NO!!! to WD40. It is a water DISPLACER - once it evaporates, the water is back & rust starts allover again. Use one of the lanolin based anti-rust treatments, or 'Ballistol' (I got mine from Mitre10) or Boe-sheild (if you can find it - try engineering suppliers like Blackwoods)
-
30th November 2006, 09:38 AM #4
Buff the rust off, resharpen or hone them 'cos the buff will dull the edge.
The rub some Trad Wax on them.
WD40 won't last.
Lanoline goes tacky but will last if you are not using them often.Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
30th November 2006, 08:42 PM #5Use one of the lanolin based anti-rust treatments
I like the tackyness that Cliff pointed out... I wipe it off prior to use and think the tacky layer shows its got a good coat. The lanolin in a spray can (lanotec??) is quick, easy and through.
I wouldn't mind blueing my tools, but it seems like a fiddly job and expensive for a 'once off'.
-
30th November 2006, 11:06 PM #6
The 'sheep in a spray-can' works, I have it spayed alls over my machines, I have just changed over to the wax on my hand tools 'cos I don't like the sticky tacky finish.
I use Lanoguard.Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
30th November 2006, 11:12 PM #7
a good way to get rust off is to make a citric acid sollution. Just a coffee jar of water with say a tea spoon of citric acid in it. You get citric acid in the baking section of your supermarket.
Leave it overnight and it will really get the rust off. This is a good one too if you are restoring old tools
StudleyAussie Hardwood Number One
-
1st December 2006, 07:11 AM #8Cheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
-
1st December 2006, 07:26 AM #9
Not having a go at you Cliff... ... just pointing out that what one person dislikes another likes, for other reasons.
Wax is probably more practical for tools if you are using them more often than I do.
Doesn't really matter what is used though, I reckon everyone hates rust :mad: , and you'd have a rough time of it up in FNQR.... dripping sweat on them and with the humidity!
-
1st December 2006, 07:55 AM #10
-
1st December 2006, 09:16 AM #11New Member
- Join Date
- Nov 2006
- Location
- Lake Macquarie
- Posts
- 3
-
1st December 2006, 09:54 AM #12Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
1st December 2006, 10:02 AM #13
No, just that if I save money on this sort of stuff (which I also use to:
- clean off epoxy from my hands; and
- dissolve aliphatic glue joints that weren't quite right)
Besides why buy the best balsamic vinegar if all you want is a mild acid, not something that you are going to eat - tools and wood don't have taste buds, even if the wood does talk.....Cheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
-
1st December 2006, 10:25 AM #14
much the same JMK
Mind you the citric isn't expensive either. Buck or so for a little container that mixes up with lots of water
StudleyAussie Hardwood Number One
-
1st December 2006, 08:05 PM #15
Thank to all for the suggestions.
Similar Threads
-
Electrolysis - removing rust from ferrous tools
By Shedhand in forum HINTS & TIPSReplies: 26Last Post: 7th February 2007, 03:58 PM -
Are all chisels equal?
By Tiger in forum HAND TOOLS - UNPOWEREDReplies: 10Last Post: 6th April 2006, 05:41 PM -
LV Honing Guide Mk II – Second Impressions: Chisels
By derekcohen in forum SHARPENINGReplies: 8Last Post: 27th May 2005, 01:25 PM -
Stubai Chisels
By Termite in forum HAND TOOLS - UNPOWEREDReplies: 8Last Post: 11th January 2005, 01:09 PM -
More Chisels
By Bob Smalser in forum HAND TOOLS - UNPOWEREDReplies: 7Last Post: 30th August 2004, 12:06 AM