Results 1 to 8 of 8
  1. #1
    Join Date
    Jan 2013
    Location
    Tasmaniac
    Posts
    1,470

    Default Staircase handrail

    Tasmanian Blackwwod, the builder roughed out the blank and put the recess in the bottom where the balustrades fit into then asked me to carve the profile.
    It possibly could be used as is however there is a flat spot on the top that could be further resolved.
    I told the builder I would prefer not to do the job, however sensing his disappointment I relented. I know he is very fussy, in fact he is the only person I have done woodturning for that did not seem happy with a previous job.
    He is dropping in tomorrow to see it in the flesh, it should be interesting.
    Blackwood is not a renowned carving timber.
    IMG_0690.jpg
    IMG_0691.jpg

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    May 2012
    Location
    Woodstock (Cowra)
    Age
    74
    Posts
    3,372

    Default

    Interesting, would like to see the house and finished stairs. He is obviously a high end builder
    The person who never made a mistake never made anything

    Cheers
    Ray

  4. #3
    Join Date
    Feb 2012
    Location
    Denmark, WA
    Age
    66
    Posts
    174

    Default

    So how did your builder react?
    I'm surprised to hear that you don't rate Blackwood. The couple of occassions I have used it I found pretty easy going.
    Westbury's lady carver, Ellen Nora Payne and Robert Prenzl did some good stuff in Blackwood.

    Philip

  5. #4
    Join Date
    Jan 2013
    Location
    Tasmaniac
    Posts
    1,470

    Default

    Quote Originally Posted by HuonPhil View Post
    So how did your builder react?
    I'm surprised to hear that you don't rate Blackwood. The couple of occassions I have used it I found pretty easy going.
    Westbury's lady carver, Ellen Nora Payne and Robert Prenzl did some good stuff in Blackwood.

    Philip

    Hi Phil
    Builder seemed happy with what I'd done. Paid me and wanted to take the item home to see how it looked in situ before deciding what to do next. I had a plan on how to resolve the unresolved area on the top and even had made a drawing of it. I let him take the drawing with him. He said he had a mate who was expert in such matters and he wanted to consult with him first about how to finish it off.
    He said there was a possibility he may be back for further work on the item.
    I am very interested to see how it pans out and am curious about the expert.
    I feel like such an amateur. Only been woodturning for 42 years, have a trade certificate as an engineering pattern maker and an honors degree in sculpture and furniture design.
    I think I mentioned I thought the guy was a fussy client.
    P.S. Regarding Blackwood as a carving timber. I guess I have been spoiled working mainly on Huon, King Billy, and Jelutong in the old days in my trade.

  6. #5
    Join Date
    Jul 2005
    Location
    Oberon, NSW
    Age
    63
    Posts
    13,354

    Default

    I find it interesting that he's capable of routing out the rebate for the balustrade, which is generally the 'make or break' part...

    I hope you'll keep us posted as to how it all turns out!

    (And, perhaps, about the expert. You've piqued my curiosity... )
    I may be weird, but I'm saving up to become eccentric.

    - Andy Mc

  7. #6
    Join Date
    Aug 2012
    Location
    Caringbah, NSW
    Age
    81
    Posts
    385

    Default

    Quote Originally Posted by artful bodger View Post
    He said he had a mate who was expert in such matters and he wanted to consult with him first about how to finish it off.

    I think I mentioned I thought the guy was a "fussy client".
    .
    You are SO polite! I can imagine what he would be called in my neck of the woods! Sounds like a fair dinkum pain in the (I guess you would politely call it "the lower lumbar region") And if his mate is such an expert I am amazed that his mate didn't do the job in the first place. Looks great and wish I had half the talent of the highly qualified "amateur".

  8. #7
    Join Date
    Jan 2013
    Location
    Tasmaniac
    Posts
    1,470

    Default

    Quote Originally Posted by Skew ChiDAMN!! View Post
    I find it interesting that he's capable of routing out the rebate for the balustrade, which is generally the 'make or break' part...

    I hope you'll keep us posted as to how it all turns out!

    (And, perhaps, about the expert. You've piqued my curiosity... )
    The rebate was not complete when he dropped the item off, I had to widen it and there was a tad of guesswork involved.
    I am sure the client is a competent builder and joiner, he has been in the game for a long time and does work on some of the heritage "National Trust" type places.
    He first showed up with the blank for the handrail section that comes down a flight of stairs, turns 180 degrees and then goes down the next flight.
    It had joins in it and had the rebate on the bottom but needed the carving.
    It looked like a horrible job to do with changing grain directions, an almost impossible shape to clamp to anything and most of all it already had had a lot of work put into it meaning if I stuffed the job up it would be worse than if he did. I explained to him how I would cut out the shape on the bandsaw and how I'd carve it. Thank goodness he took it home to have a crack at it himself. Have not asked how it went.
    As for the expert, yes, I am curious too. Maybe he is an architect who specialises in old houses?.

  9. #8
    Join Date
    Jan 2013
    Location
    Tasmaniac
    Posts
    1,470

    Default

    Quote Originally Posted by Gary H View Post
    You are SO polite! I can imagine what he would be called in my neck of the woods! Sounds like a fair dinkum pain in the (I guess you would politely call it "the lower lumbar region") And if his mate is such an expert I am amazed that his mate didn't do the job in the first place. Looks great and wish I had half the talent of the highly qualified "amateur".

    Thanks Gary, however I am not always polite.
    I just realise this is a family type forum and rude posts get censored swiftly. Plus I actually have no beef with the bloke, he is quite a likeable chap. I suppose really good builders rarely do any woodcarving and I have carved at least one other job for him before which seemed to pass the quality control test.

Similar Threads

  1. Timber handrail for an outdoor staircase - problems, please help!
    By scottybeez in forum WOODWORK - GENERAL
    Replies: 3
    Last Post: 1st January 2021, 09:41 PM
  2. handrail protection
    By rbalse in forum METALWORK FORUM
    Replies: 5
    Last Post: 12th June 2008, 09:26 PM
  3. Staircase Handrail
    By Metung in forum DOORS, WINDOWS, ARCHITRAVES & SKIRTS ETC
    Replies: 5
    Last Post: 21st December 2007, 11:02 AM
  4. handrail help
    By Dan_574 in forum FLOORING, DECKING, STUMPS, etc.
    Replies: 9
    Last Post: 18th April 2006, 09:39 AM
  5. Handrail Joins
    By timbernovice in forum FLOORING, DECKING, STUMPS, etc.
    Replies: 5
    Last Post: 13th September 2004, 08:59 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •