Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 28
-
10th June 2014, 10:19 PM #1
Timber choices for kitchen utensils
Evening all
I am wanting to have a go at making a set of utensils for the kitchen out of wood (so the horrid plastic things can be cast out)
What are good wood choices for utensils. How about Mango or QLD Rosewood or NG Rosewood?
I would like to replace everything in the kitchen, so uses will range from salad servers to wooden spoons for stirring hot liquids/serving hot foods.
I would probably use the Ubeat finish for them and reapply periodically.
Many thanksIf you find you have dug yourself a hole, the first thing to do is stop digging.
I just finished child-proofing our house - but they still get inside.
-
10th June 2014 10:19 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
10th June 2014, 11:13 PM #2
Hi,
The traditional favourite is Olive wood.
RegardsHugh
Enough is enough, more than enough is too much.
-
10th June 2014, 11:36 PM #3
Thanks Hugh
They would look very nice in Olive as well.
I might pick some at the Sydney T&WWW show.If you find you have dug yourself a hole, the first thing to do is stop digging.
I just finished child-proofing our house - but they still get inside.
-
10th June 2014, 11:45 PM #4
-
10th June 2014, 11:49 PM #5SENIOR MEMBER
- Join Date
- Jul 2009
- Location
- Waitpinga
- Posts
- 835
For what its worth, I've still got 3 birch spoons I carved over 7 years ago and never finished with anything which are still going strong.
-
10th June 2014, 11:53 PM #6
You could PM "Big Stan" to see if he will have any Olive at the show.
-
11th June 2014, 01:44 AM #7GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 3,543
Including the one-offs and prototypes, I've carved maybe 100 kitchen "sticks", spoons, ladles, forks and salad servers. Any wood from any tree species which produced an edible material should be OK. I have used mostly birch as it was easy to carve and very inexpensive for me. I'd like to split some fruit wood (apple & pear) to carve something more elegant than I have done in the past.
I use an oven-baked olive oil finish which penetrates the surface wood much further than anything applied at room temperature.
-
11th June 2014, 08:41 AM #8SENIOR MEMBER
- Join Date
- Mar 2014
- Location
- UK
- Posts
- 349
Speaking from a different continent I can only say that birch, beech, willow & olive are the commonly used wood for spoons in Europe. Fruit woods should be OK I reckon but might be prone to splitting in use also their beautiful colours tend to change & fade relatively quickly. Any of the maples would be fit for the purpose too.
One obvious tip for spoon making is to raise the grain after sanding a couple of times because it is going to happen soon enough in their intended use anyway.
As you say olive would be the most attractive, it is a hard & heavy wood but carves very nicely with edge tools.
I would advise you do your homework on any wood type you do end up using though because there are plenty of species which are toxic, indeed most members of the true rosewood genus have toxic resin pockets that dissolve in hot water & wood from the Yew tree is very dangerous if taken internally. These are only two wood types I know of, there will be many others that are either toxic or perform poorly being plunged into boiling liquids periodically. Olive oil is the most commonly used finish for spoons & bowls that will be used for food.
If your posts suddenly stop, then I'll know you chose the wrong type of wood !
-
11th June 2014, 09:05 AM #9GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 3,543
Thanks Mike, my choices, too except willow. If the salicylic acid is only in the bark, then it would be OK, too.
I have the fruitwood, precracked. Thought I might follow the natural splits and see if I get any useful pieces. Otherwise into the smoker BBQ!
The oven baked olive oil finish can't leach out into boiling liquids.
Preheat the oven to 325F (no more than 350F.)
With a cake rack over a sheet pan, slather your wood tools with olive oil.
So they are dripping with it.
Into the oven for 3 minutes by the clock. Stand there and wait. Don't fry it.
Out of the oven you will see hot expanding air bubbling out through the oil.
As the remaining wood air cools and contracts, it will draw the oil well down into the surface wood. Wipe off the excess tomorrow.
212F/100C isn't hot enough to get the air/oil in the wood to move.
Simple application of Charles' Law (gas physics).
Plus, the spoon is ready for years of use just as soon as it has cooled.
Simple rinse in hot water makes for a quick wash-up.
-
11th June 2014, 09:22 AM #10SENIOR MEMBER
- Join Date
- Jul 2008
- Location
- act
- Posts
- 880
Adam ive got a bunch of celery top wooden spoons I made 6-7 years ago, these regularly go through the dishwasher and are still going strong
-
11th June 2014, 10:29 AM #11SENIOR MEMBER
- Join Date
- Mar 2014
- Location
- UK
- Posts
- 349
Hmmm...... that does sound like an interesting & efficient technique of getting the oil deep into the wood RV.
It is a pretty standard traditional practice when finishing Lime wood to heat up linseed oil in a pan 50% diluted with turpentine & when it only JUST boils ( about 5 or 10 seconds before it reaches flashpoint ! - this is dangerous ) you pour the oil over the carving . You can see the wood drinking it in, wipe off the excess , after a month the oil dries, the carving is completely waterproof. This darkens the wood substantially , brings out the figure & adds a bit of depth to what is visually rather boring wood , a coat of wax completes the job.
Obviously you don't want to use turpentine anywhere near a spoon used for food anyway but your step of heating the wood to aid the penetration is excellent , although I wouldn't like to risk anything more than spoon in an oven !
-
11th June 2014, 10:37 AM #12GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 3,543
The process is fast and very efficient.
The one thing to remember is that the oily spoons are 325F when they come out.
Like French Fries. So resist the urge to pick it up, OK?
Why not just slather the oil on the carving and bake for 3 minutes?
Do the experiments with wood scrap. Fairly benign option.
At 3'30", birch wood will begin to brown a little, I've done a few like that.
Far safer than what you describe (which you won't ever do in my kitchen under any circumstances!!!!)
The other thing about raising the grain. I tried to carve the entire surface with no sanding to shred the wood fiber. Sort of like finishing with a cabinet scraper.
-
11th June 2014, 02:26 PM #13New Member
- Join Date
- Jun 2013
- Location
- Perth
- Posts
- 1
Hmmm......I've done the old "act first, research later" trick ....again!
I've just finished making about 10 spoons and spatulas and searched the forum for the best finish to use - so thanks RV for the info on baked olive oil - I will definitely give that a go.
However, I've made my kitchen utensils from Jarrah, Sheoak, WA Blackbut, and Marri. Are there any toxicity problems with any of these??
-
11th June 2014, 03:50 PM #14If you find you have dug yourself a hole, the first thing to do is stop digging.
I just finished child-proofing our house - but they still get inside.
-
11th June 2014, 04:16 PM #15GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 3,543
BSM, ozhunter and others: your very own CSIRO/Forest Products people ought to be able to
guide you about "food-safe" Australian woods.
40 yrs ago, there was a bunch of them in Hobart. What with consolidations, maybe they got hung up with the Protein Chemistry gang in Royal Parade/Melb.
Ah, yes chaps, I'm a Post-hole Digger in Botany/Wood Science (LaTrobe/Wardrop.)
Wait til you see the wood air foaming out through the hot oil. Quite surprising.
Similar Threads
-
Osage Orange, Kitchen Utensils
By tomo_scotto in forum WOODWORK PICSReplies: 3Last Post: 22nd December 2012, 07:26 AM -
Australian Tonewood: Choices, Choices, Choices
By Student in forum MUSICAL INSTRUMENTSReplies: 34Last Post: 12th August 2010, 09:49 AM -
woodturning handles for kitchen utensils
By daf in forum WOODTURNING - GENERALReplies: 9Last Post: 24th September 2009, 09:31 AM -
timber suitable for utensils and containers
By bowerbird in forum WOODTURNING - GENERALReplies: 37Last Post: 12th June 2008, 10:47 PM -
Wood/Finish for Kitchen Utensils
By Dean in forum WOODTURNING - GENERALReplies: 6Last Post: 27th August 2003, 06:43 PM