Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: New to wood carving
-
28th April 2020, 08:42 PM #1New Members
- Join Date
- Apr 2020
- Location
- Penrith
- Posts
- 2
New to wood carving
Hi all,
I am looking to get into wood carving as a hobby. I have started to collect the tools I will need such as knives and gouges.
I got this book a while ago - https://www.amazon.com.au/Urban-Wood.../dp/0857833774 - but it's for trees in England.
I was wondering what wood type I should be sourcing/using for carving as a beginner.
I live in Penrith, New South Wales which is on the border of the Blue Mountains.
Any help with wood types for carving as a beginner and identifying wood types would be much appreciated.
Alec
-
28th April 2020 08:42 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st May 2020, 08:28 AM #2
Welcome to wood carving! Here's a database that has woods from all over the world. Wood Identification Guide | The Wood Database
The key data to look at for carving is the Janka Hardness. The higher the number, the harder the wood. Two species I have heard of that are common in AU are Poplar and Jelutong. I've also heard Huon Pine and Paulownia may be available.
Claude
-
5th May 2020, 10:30 AM #3SENIOR MEMBER
- Join Date
- Apr 2007
- Location
- Arundel Qld 4214
- Age
- 86
- Posts
- 701
Paulownia is a soft timber, similar to western red cedar, but very light in colour. It finishes well and looks great when lacquered. The only negative is that your tools must be very sharp or the timber tends to tear/splinter. The only place I know that sells it is Port Phillip Shutters in Mordilac Melbourne.
-
6th May 2020, 05:44 PM #4Senior Member
- Join Date
- Jul 2008
- Location
- Sydney
- Posts
- 299
Alec
Your best bet would be to give Trend Timbers at Mulgrave (trendtimbers.com.au) a call to see if they're open. They stock a good selection of carving blanks, including jelutong, white beech, huon pine, continental lime wood, rosewood, etc. They also stock carving tools.
Don't waste time with locally 'found' timbers, at this point in time, save that for when you have some basic woodcarving skills. In principle, just about any wood can be carved, look at the lovely carvings from the Pacific islands, some of which are carved in ebony. BUT.... not a good timber to start learning with
There are plenty of how to carve a 'whatever' videos on YouTube, but a good place to start to get some excellent practice that I would suggest is Mary May woodcarving, as she uses traditional gouges and techniques. Another (paid) tuition site I can recommend is Chris Pye Woodcarver who also teaches the traditional techniques mostly with gouges, but also with carving chisels for lettering.
-
7th May 2020, 07:49 AM #5
-
21st May 2020, 12:58 AM #6New Member
- Join Date
- Mar 2015
- Location
- Shelley
- Posts
- 1
New to wood carving
Welcome to a great hobby. Very relaxing and intensely frustrating at times!!! I started with lessons at evening classes at a local Technical School but I think they are no longer available. Any Mens' Sheds near you. Worth finding out for th support and friendship.
Someone mentioned Jelutong as a suitable timber to start with. It is...quite soft and often you don't need a mallet. It comes from Indonesia and is the timber I started with. Good to learn on but unfortunately the last time I tried to buy some I was told it no longer imported. On of the others mentioned was Huon Pine. Quite prized but also extremely difficult to source. it is from Tasmania and considered a protected timber. Also very expensive.
I use Jarrah a lot. A West Australian timber that was used extensively in the building industry so I have been able to build up a collection from demolition sites etc. You will definitely need a mallet, and keep your chisels sharpened. But it has a beautiful finish and is now recognised as a magnificent wood for furniture.
good luck
Jim
-
8th August 2020, 11:05 PM #7
I carve wood spirits at the moment and I acquire Camphor Laurel and is a tight grain timber readily available.
A day spent carving is never lost
Similar Threads
-
Is wood carving the scummy end of wood working
By MeTaBo MaN in forum WOODCARVING AND SCULPTUREReplies: 26Last Post: 11th June 2018, 12:10 PM -
Never done wood carving can you help?
By Johnboy1969 in forum WOODCARVING AND SCULPTUREReplies: 3Last Post: 6th June 2013, 05:29 PM -
wood for carving QLD
By Grymord in forum TIMBERReplies: 7Last Post: 24th August 2009, 07:09 PM -
Wood Carving tools + Wood Advice needed BAD
By tiki in forum WOODWORK - GENERALReplies: 8Last Post: 23rd July 2006, 09:51 PM -
Wood Carving tools/wood help needed....
By tiki in forum WOODCARVING AND SCULPTUREReplies: 2Last Post: 4th August 2003, 12:56 AM