Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 91 to 105 of 588
-
3rd August 2006, 10:42 PM #91Originally Posted by Gumby
The FTP has been an issue for Skew because of me and what I have been up to today. Unfortunately I have been downloading on two PCs and uploading on three - I only have one router. Added to that, I have had to use my server (MMC reader/writer) to upload a half gb to my phone in addition to it being the FTP server and also uploading another file on Azureus, so the CPUs in my house are supplying the heat for the evenings comfort. It should be better now, sorry Skew .
-
3rd August 2006 10:42 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
3rd August 2006, 11:08 PM #92
I think I may have just hit on a solution. When I create the torrent file, I have the option of making it 'decentralised'. This means you have to have Azureus to download it BUT it isn't posted on any website for all and sundry to get. I can just email the torrent to those who request it and they would be forum members only.
I just tried it now and emailed a new decentralised torrent to my work computer which installed it and commenced downloading from my home computer straight away, bypassing the Mininova or Torrentspy sites completely. (I can control the work comp from home using LogmeIn)
So, if we make decentralised tracking and we all get Azureus, we don't have to share anything with anybody else but those who have the email. Of cousre, what happens to the files once they are on somebody else's computer, we have no control over, even if they are forum members.
Is that going to be OK? It just means if you use torrents, you have to have Azureus. You can request the torrent file from me or anybody else who makes one which we can email to you (only very small files so dial up is no issue) and then proceed as normal. You can still FTP from Groggy if you prefer.
This could be the answer.If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
-
3rd August 2006, 11:34 PM #93Originally Posted by Zed
This Bulletin Board is owned and operated by U-Beaut Enterprises
Copyright © 1999 - 2006 U-Beaut Enterprises. All rights reserved.
No part of these forums may be reproduced or transmitted in any form or by any means without the prior consent of copyright owner U-Beaut Enterprises
(See bottom of page, and the pic, last line.)
Those are my principles, and if you don't like them . . . well, I have others.
-
3rd August 2006, 11:57 PM #94
Re the copyright issue, it is my understanding that all works are granted copyright by default to the author at the time of item creation (in Australia).
They haven't been published on the forums, only information on how to obtain a copy has been posted - so I don't believe any copyright has been transferred.
I think that it would still be a good idea at least to put some contact details at the end of each video (just an email address, throwaway if necessary to stop spam) so that if anyone wants to legitamately do something with the video, at least they can contact the author to discuss.
-
4th August 2006, 12:10 AM #95Originally Posted by Gumby"Clear, Ease Springs"
www.Stu's Shed.com
-
4th August 2006, 01:10 AM #96Originally Posted by Groggy
Ahhh... the heady days of such file xfer protocols as ZedZip, Zmodem (and the X&Ymodem variants) and who can forget the Hydra bunfights when they dared to step outside the FTSC compliance. :eek:
Oh, the good ol' days when 'twas simple to be a 'puta nerd. OK, OK... I'm heading back under my rock, no need to shove...
- Andy Mc
-
4th August 2006, 02:47 AM #97
I had an idea for a simple project recently (was actually thinking of kids toys), and it has taken to now to remember it, and realise how suitable it would be for many as we embark on a new way of communicating our various 'talents'.
With a bit of MDF, and blackboard paint, we have
"Clear, Ease Springs"
www.Stu's Shed.com
-
4th August 2006, 03:02 AM #98
It may seem like a severe case of overkill, but when I have the inclination (and the energy), I prefer to use more than 1 camera, and separate audio recording devices, and getting all these synchronised is a PITA if you don't use a clapper board.
(I videoed my own wedding, with the help of a couple of friends, and at any one time had 4 video cameras and 2 separate audio recorders going. Getting the resulting footage all synchronised before choosing what view to use when was a right nightmare, as I didn't have a clapper board. I ended up using camera flashes (ie from people taking photos) to synchronise the tracks.
What would have been thousands of times better would have been getting all the cameras looking at the same clapper board, then without stopping any camera, repositioning them and leaving them rolling. Would then have taken seconds to synchronise all the tracks rather than the 100 odd hours! (My friends tried to do the editing in-camera, constantly stopping and starting the recording, rather than just leaving the camera rolling, so each time they stopped then started, was another synchronisation that was needed. Luckily people take a lot of photos at weddings so I had plenty of camera flash instances to synchronise with!))"Clear, Ease Springs"
www.Stu's Shed.com
-
4th August 2006, 03:22 AM #99
DAmn I do get confused!!
So Im presently downloading the Azureaus 2.4.0 model and am pretty much done... once its down and installed what then? Do I have to download and install this torenz thing? then do I have to email somebuggar to get the ruddy files? or are they still available at the unbeat link someone put up?
Gaaaaaaaaaak I hate technoshyte!! :mad: But Im game for anything... ahem once? heck I will even have a go at some movie takin... hey I could meet up with Rampserdoosy and Shaver and take movies of them buggars to!... what with Ramps doin a stripper we could do a friggin movie of the mad buggar building it!! Cool there he is hunched over the table saw slicin out strips and on comes this Aussie accented whispering Attenbourough fella "and as can be seen the increadible humanoid rampuswestaussieus is an industrious creature... "
and the inevitable shed scope AussieAttenbourough again "Shedus Dingoius... the perfect example of West Aussie sheditis inextremus not the confined mess the small areas between tools this is designed so that those afflicted with sheditis inextremus have something to continually feed their secondary affliction that of whingamaximusitis a terrible affliction often seen in... oohhh ssshhh note up there in the woodloft the amazing Jarrah hardasnails timberitis amazing timber specie capable of increadible patterns and strength but one must at all times be quiet as possible around its sleeping area as its prone to bendyitis... "
I reckon along with the serious stuff HUMOR should be encouraged Im game!
Okay its downloaded!! whahooo that was quick and pretty damned slick with that blue frog!
DASM!! I got as far as testing port "26750" and after nothing for a few minutes its got the message "Unable to test: Invalid port given or test service failed Another application may already be using this port"... you what?? the number of the port was already in the little slot all I did was hit "test"... as for invalid port how the blazes would I know if its valid or not they put it there! test service failed? its their test!! gggrrrrrrrrrrr another application may already be using this port" What port what program... whaaaaaaaaaaaaaat!!!
they dont offer any suggestions or clues as to what to do now!! gak I hate technoshyte!!... sigh... okay fellas fess up what the heck do I do now???
aaaggghhh the little blue froggy jumped up and bit me!! :eek: said the firewall was blocking it and it must be open so Ive now made an exception for it... test again same thing! whats happenin I wanna watch the videos!! sob sob whine whine whinge whinge cuss swearin mutterin cursinBelieve me there IS life beyond marriage!!! Relax breathe and smile learn to laugh again from the heart so it reaches the eyes!!
-
4th August 2006, 03:32 AM #100
Hi Dingo
Once you have installed Az, you can then click on one of the movie links. It will take you to another web page, where you will find the actual file for download. When you click on this, a window will pop up asking what program you want to use, and you point it at Az, and click ok. That's it.
Hope that makes sense.
After doing it once, you will be a pro in no time!"Clear, Ease Springs"
www.Stu's Shed.com
-
4th August 2006, 01:27 PM #101
mate Id love to!!!... the damned thing wont let it get a port?? Ive no bloody idea why not but the above I think explains my problem... still the same today... I'll delete the program tonight if I cant get it to work and hope for the dvd
Believe me there IS life beyond marriage!!! Relax breathe and smile learn to laugh again from the heart so it reaches the eyes!!
-
4th August 2006, 01:33 PM #102
What it means is your router is blocking the torrent. If you got into your router setup program, you should be able to tell it to allow traffic on the port that is currently saying is blocked.
A port is a gateway through your router. Some gateways are open, allowing you to do things like download web pages, send emails etc. (I think port 80 is the norm for emails). There are other ports set aside for video calls, etc etc. Torrents use a different port again - it is a security thing- turning off the gateways that are not needed. In this case, the gateway you need for the torrent is currently shut, but as you know you need it open, you need to tell your router to do so.
Hope that is enough, without being too confusing (I'm still coming to grips with it all myself)."Clear, Ease Springs"
www.Stu's Shed.com
-
4th August 2006, 02:47 PM #103
Dingo, try testing port 6881 intsead. That's what my Azureaus uses.
If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
-
4th August 2006, 02:56 PM #104
Part 1 of the Ubeaut Finishing video is now available.
You'll notice that the torrent file has been made available as a zip file. This is simply because the forum upload will only accept files with certain file extensions. In case some of you don't understand zip files, I'm going to attach the torrent file to this post as well, but rename it to something else and see if it works. I have renamed it by adding .txt to the end. You can download this file by clicking on it and choosing the save option. Then when it's on your computer, right click on it, rename it by deleting everything after the word 'torrent' (i.e delete the .txt). This file can then be imported into Azureus as usual.
Enjoy the video, parts 2 ,3 and 4 are ready to be released so the quicker we get this out, the sooner we can start the others.
You may find that these downloads slow your computer down somewhat. You may be better off to start the download overnight when you aren't using the computer. It may be easier for you to seed at that time too.Last edited by Stuart; 20th November 2006 at 03:55 PM.
If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
-
4th August 2006, 03:21 PM #105
Help
My problem is that the two latest will only play as audio - I have the latest version of Media Player, but I don't get a picture. Gumby's lesson on thicknessing and jointing is fine but the two from DPB are sound only. What do I need to do?Cheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
Similar Threads
-
A call to Forum Members to Contribute......FAv Formulas
By NewLou in forum Links to: WEB SITESReplies: 33Last Post: 23rd March 2007, 12:19 PM -
24-7 of streaming woodworking videos
By labolle in forum Links to: INSPIRATIONAL WEB SITESReplies: 45Last Post: 11th December 2006, 02:05 PM -
Invitation to all forum members.
By Different in forum WOODWORK - GENERALReplies: 5Last Post: 31st July 2005, 12:14 AM -
How many forum members does it take to change a light bulb?
By Eastie in forum WOODIES JOKESReplies: 58Last Post: 15th October 2003, 04:22 PM -
Woodworking Instructional Videos
By Angelo in forum WOODWORK - GENERALReplies: 1Last Post: 19th December 1999, 11:51 PM