Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 286 to 300 of 588
-
11th August 2006, 12:55 AM #286
Zed, congratulations on the video, great work. Once again the bar has been raised. You forgot the warning not to put a magnet in each pocket :eek:.
Gumby, I went into the city this evening and my son used the net (i.e. - he paused azureus to max his downloads ), also, if multi IP is not turned on by the host then we D/L the same rate.
-
11th August 2006 12:55 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
11th August 2006, 01:24 AM #287
Some reading.
http://www.azureuswiki.com/index.php/Good_settings
http://www.azureuswiki.com/index.php/Ignore_Rules
Note: you only get to see some of the settings mentioned in the Good Settings table if you change to intermediate mode.
I have changed to intermediate & gone to options queue & made my Max Simultaneous downloads 2 & Max Active Torrents 6.
Currently I have downloads at around 22Kbps & uploads at around 11Kbps.
My ratio is in the red but when I have a few more of the popular ones downloaded that will turn around.
I'm on to one of the more popular files now, I have 7 seeds on that one file & it is hitting a download speed of 25Kbps on it own. I have 2 peers picking up the same file from me at the same time hitting a rate of around 7Kbps. While this is happening, I have another download running at about 11Kbps & 2 more uploads.
It is doing well considering that I'm am looking at it from about 80Kms away using Logmein at the same time.
I think I have it sorted now.Cliff.
If you find a post of mine that is missing a pic that you'd like to see, let me know & I'll see if I can find a copy.
-
11th August 2006, 10:21 AM #288Originally Posted by Cliff RogersThose are my principles, and if you don't like them . . . well, I have others.
-
11th August 2006, 10:24 AM #289Originally Posted by zenwoodIf at first you don't succeed, give something else a go. Life is far too short to waste time trying.
-
11th August 2006, 11:50 AM #290
Think I'm doin' ok. Don't think it is an issue, but my connection also goes through an 802.11b wireless router, which could also be a choke point.
Zed - cheers mate - great video. Very informative.
Gumby gave me the source of the magnets www.aussiemagnets.com.au
I found these on the site - a bit longer than necessary, cost, around $11
http://www.aussiemagnets.com.au/Merc...y_Code=Ferrite
My only question now is - do they come with a very flat side? You wouldn't want to have to flatten it yourself I'm guessing, or do you - scary sharp method?"Clear, Ease Springs"
www.Stu's Shed.com
-
11th August 2006, 12:13 PM #291
The magnet idea came about in a thread last year.
http://www.woodworkforums.ubeaut.com...cknesser+snipe
It's an interesting read, specially all the replies and different ways of going about things.
My magnets were straight. Or at least they looked straight so I've never checked them. I set the knives using them last year and haven't touched them since. I don't even know what snipe is
Stu, I bought 4 and probably on need 2. Want to deal ?If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
-
11th August 2006, 01:03 PM #292
Sounds good So long as part of the deal includes a demo on my planer! (Just to prove the magnets work of course!)
"Clear, Ease Springs"
www.Stu's Shed.com
-
11th August 2006, 06:34 PM #293
Well, the vids are getting more professional. The uncut version of the shop tour is now seeding.
(only 28MB)If at first you don't succeed, give something else a go. Life is far too short to waste time trying.
-
11th August 2006, 06:53 PM #294.
- Join Date
- Jul 2005
- Location
- Victoria
- Posts
- 5,215
Zeds vid was a beauty and well put together Loved the saftey sandals. they are nearly as good as mine. Only thing i wished you would have shown was how you set each of the 4 blades at TDC and how you lock in the cutter head block
-
11th August 2006, 07:52 PM #295
I have downloaded Bartons Bedlam but when I open it in Media Player it says "error downloading codec"
Is there an easy fix.
Also, my computer is ridiculously slow when bit torrent is running, so slow in fact that I only use the torrent when I don't want to do anything else on the computer.
I have a few other vids trying to download since last night but they are all at 0%, Stu's is the only one that worked.
I am on Optus Broad band.
BTW, I am a complete computer NUMPTY!!!!!
Cheers, Jack."There is no dark side of the moon really. Matter of fact it's all dark."
-
11th August 2006, 08:46 PM #296Originally Posted by Lignum
I dont lock in the cutter head block(If I did i'd just wedge it with some timber....) the friction of the magnets and knife tension holds it in place.... Havnt had an issue yet....Zed
-
11th August 2006, 08:47 PM #297
I'm currently downloading Zed's magnets video with azuwhatsit, and it is absolutely flying. Coming down at 80 - 90, and going up at about 20.
Chris
========================================
Life isn't always fair
....................but it's better than the alternative.
-
11th August 2006, 08:53 PM #298Registered
- Join Date
- Aug 2003
- Location
- .
- Posts
- 10,482
Originally Posted by Zed
-
11th August 2006, 09:01 PM #299Originally Posted by Jack E
Normal disclaimer here... if it breaks anything on your pc, I'm not accountable.Chris
========================================
Life isn't always fair
....................but it's better than the alternative.
-
11th August 2006, 09:07 PM #300
ogg is another music format, like mp3. No idea what APE is, ask Zed.
"Clear, Ease Springs"
www.Stu's Shed.com
Similar Threads
-
A call to Forum Members to Contribute......FAv Formulas
By NewLou in forum Links to: WEB SITESReplies: 33Last Post: 23rd March 2007, 12:19 PM -
24-7 of streaming woodworking videos
By labolle in forum Links to: INSPIRATIONAL WEB SITESReplies: 45Last Post: 11th December 2006, 02:05 PM -
Invitation to all forum members.
By Different in forum WOODWORK - GENERALReplies: 5Last Post: 31st July 2005, 12:14 AM -
How many forum members does it take to change a light bulb?
By Eastie in forum WOODIES JOKESReplies: 58Last Post: 15th October 2003, 04:22 PM -
Woodworking Instructional Videos
By Angelo in forum WOODWORK - GENERALReplies: 1Last Post: 19th December 1999, 11:51 PM