Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Burl for Box Making
-
27th January 2007, 07:45 PM #1
Burl for Box Making
this burl of unknown eucalypti timber is
255mm across the bottom
195mm high on the left hand side
160mm high on the right hand side
275mm from the top of right hand side ,parallel with bottom
22 mm thick
it has a 3 mm cup at 50mm x 50mm lower left corner ( deepest )
was looking for an exotic timber around the same volume ( 255mm x 160mm x 22 mm = Approx 900 cm^3)
first pic is dry
second pic has been wet down with methohow come a 10mm peg dont fit in a 10mm hole
-
27th January 2007 07:45 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
28th April 2007, 03:56 PM #2
is these for sale? Or just showing what you got?
Toni
-
28th April 2007, 05:37 PM #3
swappsies Lubbing'
I don't have anything in my stash thoughBox Challenge 2011 - Check out the amazing Boxes!
Twist One - Wooden Hinge/Latch/Catch/Handle
Twist Two - Found Object
Twist Three - Anything Goes
-
29th April 2007, 02:30 PM #4
don't have any exotic large pieces. Only pen blanks so this one has to go
Toni
-
3rd August 2007, 07:57 PM #5Intermediate Member
- Join Date
- Jul 2007
- Location
- manildra.Australia
- Age
- 75
- Posts
- 33
Gday I have plenty of osage orange if interested Regards Karl
-
12th November 2007, 09:22 PM #6043TURNING
- Join Date
- Jun 2007
- Location
- Adelaide, SA
- Posts
- 478
I have a ton of stuffcheck out the Buy sell and Swap folder I would be happy to swap or follow the link for quick access
https://www.woodworkforums.com/showthread.php?t=58803
Similar Threads
-
Eucalipt Burl (Box Making)
By SawDustSniffer in forum TIMBER SWAPReplies: 18Last Post: 27th January 2007, 08:10 PM -
15kg/33lbs Burl (800kb of pics)
By Toasty in forum WOODTURNING - GENERALReplies: 12Last Post: 14th May 2006, 10:26 PM -
A burl or not a burl???
By TTIT in forum WOODTURNING - GENERALReplies: 8Last Post: 20th December 2005, 11:50 PM -
Making a Better Coping/Dovetail Saw
By Bob Smalser in forum HAND TOOLS - UNPOWEREDReplies: 7Last Post: 7th October 2004, 12:38 PM -
Finishing my burl
By Ben Stevo in forum FINISHINGReplies: 9Last Post: 12th July 2004, 02:38 PM