Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: Redgum offer
-
8th January 2007, 03:36 PM #1
Redgum offer
I am offering these 4 pieces of Redgum for trade.
They are kiln dried and have fantastic marble figure in the 2 bigger pieces.
The sizes, weight and postage cost is shown with each picture.
Will swap with something similar in weight or size.
Redgum has been moistened for pictures and flash was turned off.Cheers
DJ
ADMIN
-
8th January 2007 03:36 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
8th January 2007, 08:46 PM #2
ok all this timber is green , i'll match size not weight
thought you might like to choose
first up ( Pic 1 ) a 250x250 eucalyptus burl , its 250mm deep at the moment but i will cut to size ( 50mm thick for one of yours , 120mm deep for 2 x 250 blocks ) and pass through a thicknesser & square up
second pic , is of a strange pink figgerd eucalyptus 150x150mm same deal 75mm thick for 1 , 170mm thick for 2 @ 150mm ,better pic of the timber at http://www.woodworkforums.ubeaut.com...ad.php?t=42733
or i could dig out a chunk of mahogany ?
all this timber is green !! not like your kiln dried red gum
i didn't want to dice up my timber to photograph so if you pick one then i will clean it up and rephotograph for you to confermhow come a 10mm peg dont fit in a 10mm hole
-
8th January 2007, 08:58 PM #3
G'day SDS
All sounds good, for the burl how about we go 250 x 250 x 120 thick and strange pink figured eucalyptus 150 x 150 x 170 thick and I'll give you the whole lot.
I wouldn't worry about putting it through the thicknesser & squaring.Cheers
DJ
ADMIN
-
8th January 2007, 09:07 PM #4
sounds good to me , but i thought you might like to wait a week and see what shows up
how come a 10mm peg dont fit in a 10mm hole
-
8th January 2007, 09:11 PM #5
Nah, what you have offered is good for me. I will probably put some more timber up soon, so it's all good.
I will PM my details to you and pop yours in the post tomorrow if you PM your address to me toniteCheers
DJ
ADMIN
-
8th January 2007, 09:13 PM #6
sold , end of thread
how come a 10mm peg dont fit in a 10mm hole
-
8th January 2007, 10:24 PM #7
Not quite the end
All packaged and ready to post tomorrowCheers
DJ
ADMIN
-
9th January 2007, 12:32 AM #8
raped and ready to go
the off cut side of burl , sweat dips are the deeper colour (30c 87% humidity )how come a 10mm peg dont fit in a 10mm hole
-
9th January 2007, 12:41 AM #9
Looking goods SDS, looking forward to getting them. Will put them away with all the other bits ready for a rainy day
Cheers
DJ
ADMIN
-
9th January 2007, 02:08 PM #10
sent 10.00am CST 9/jan/2007
for referance to others ,
5.980kg (Standard over 500g) AU$24.75 Darwin - Melbourne
9.820kg (standard over 500g) AU$35.75 Darwin - Melbournehow come a 10mm peg dont fit in a 10mm hole
-
9th January 2007, 06:11 PM #11
Have posted the Redgum.
Cheers
DJ
ADMIN
Similar Threads
-
Finish options for Redgum coffee table?
By hamster in forum FINISHINGReplies: 9Last Post: 29th August 2008, 04:08 PM -
Ebay 2nd chance offer.
By echnidna in forum ANNOUNCEMENTSReplies: 2Last Post: 28th April 2006, 10:19 PM -
Flatsawn redgum
By Evan Pavlidis in forum TIMBERReplies: 2Last Post: 29th July 2005, 03:30 AM -
RedGum Posts and Off Cuts
By barrysumpter in forum TIMBERReplies: 1Last Post: 2nd July 2000, 12:52 PM