Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Advice required!
-
2nd October 2004, 12:32 AM #1New Member
- Join Date
- Sep 2004
- Location
- narrandera
- Posts
- 1
Advice required!
Hi Guys,
I am currently renovating a very old timber box. The ends of the boxs don't have handles just a "recessed area" (a "D" shaped area the middle of the face of the draw, where u put the ends of your fingers so you can lift the box up). I have to replace on end of the box. My first question is what do u call this sort of handle and is there a machine or tool that does this job. I didn't really want to chisel it out.
Thanx for any advice!!!!!!!
-
2nd October 2004 12:32 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd October 2004, 01:18 AM #2
You will need to use a Router and the appropriate cutter found here
http://www.carbitool.com.au/products.htm
just look for "Drawer Pull Bits" in the downloaded catalogue.
RossRoss"All government in essence," says Emerson, "is tyranny." It matters not whether it is government by divine right or majority rule. In every instance its aim is the absolute subordination of the individual.