Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
14th April 2018, 08:52 PM #1Senior Member
- Join Date
- Jul 2013
- Location
- Australia
- Posts
- 117
Applying Stylwood clear over Feast Watson Sanding Sealer?
Hi,
Thank you for reading my question.
Wattyl Stylwood is a pre-catalysed nitrocellulose lacquer, thinned with industrial universal thinner.
Feast Watson's Sanding Sealer is thinned with turps if sprayed. Turps is used with enamels, not lacquers.
Normally, you shouldn't apply lacquer over enamel, but in this case, its over a sanding sealer , albeit turps thinned.
Can anybody confirm from experience if the Stylwood, thinned with universal thinner, can be sprayed over the Feast Watson Sanding Sealer ?
I have done some test pieces of Stylwood onto the sanding sealer with no reaction , and even applied the universal thinner for Stylwood direct onto the sanding sealer surface with no adverse reaction.
Nevertheless, I would like to hear if someone has ever done this application using a spray gun, on say ,a larger flat surface like a coffee table, where the Stylwood will lie on the surface for a while.
Thank you.
-
14th April 2018 08:52 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
$&#@(*&”’. Bunnings and Feast Watson
By Lappa in forum FINISHINGReplies: 34Last Post: 21st March 2018, 04:03 PM -
Feast Watson Clear Satin Varnish
By lintonA in forum FINISHINGReplies: 3Last Post: 22nd November 2015, 10:55 PM -
Ubeaut Sanding Sealer under Wattyl Stylwood (NCL)
By govarney in forum FINISHINGReplies: 3Last Post: 2nd December 2012, 05:07 PM