Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
-
29th January 2010, 09:13 AM #1
Black Locust not just for fence posts anymore
Well black locust may only be used for fence posts but I'm a little crazy and made table out of it . Only time will tell if it stays put or self implodes. The table and legs are kiln dried quater sawn black locust and the drawer is eastern red cedar. I used Tiebond III which is supposed to be water proof and 6 coats of clear satin oil based marine poly. The top measures 28"x28". It's for the front porch so not a lot of rain gets on it, maybe it'll stay put and not curl up like a potato chip.
-
29th January 2010 09:13 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th January 2010, 09:54 AM #2New Member
- Join Date
- Jan 2010
- Location
- Pennsylvania, USA
- Posts
- 7
Looks good Jeff nice work but the question I have is how was it to work with? Did it do a number on your blades?
-
29th January 2010, 02:12 PM #3
Well John it's heavy and HARD I think it would make a great hammer head light passes on the jointer and planer are required and sand till your elbow hurts. I actually thought my ROS was broken, nope it's just really HARD wood... Black Locust is supposed to last 80 years in the ground, I believe it, it's some tough stuff... The wood about whopped me, I finally had to show it who was boss Did I mention it's HARD? I think I did but wanted to drive the point home.
-
30th January 2010, 10:49 AM #4
... what a beautiful, simple and elegant design, I love the grain matching around the drawer as well, a greenie on its way...
fletty
PS, apparently it's hard
-
30th January 2010, 12:25 PM #5
-
30th January 2010, 12:34 PM #6
I think you might have misunderstood "greenie"?
A greenie is a commendation that is sent to a member of the forum when they have done something very good, clever, big, small, innovative ... etc,
If you look at the top right hand corner of your thread you will notice a little set of scales. If you click on that you will see if you have received any commendations for your work.
fletty
-
30th January 2010, 01:02 PM #7
-
30th January 2010, 02:22 PM #8
Jeff,
A good honest little table. Simple is good in this instance. The wood looks a bit like our Tasmanian oak. Fenceposts are often made of good timber. I have only worked black locust the one time when I made a bow from a stave from the US. I was quite taken with it and found it good to work with hand tools. The bow worked very well too. I have been wanting to get my hands on some boards as I think it is a good timber and overlooked. It is grown here as a garden tree but so far I have not seen any milled.
Regards
John
-
30th January 2010, 02:24 PM #9
we are now deeply into the blind leading the blind here but my guess is that if you click on USER CP and then EDIT OPTIONS you might find that you have set up so that your reputation has been disabled (= little black box) rather than made visible (= little green boxes)
fletty
-
30th January 2010, 03:36 PM #10
-
30th January 2010, 03:57 PM #11
G'day John, Personally I think it's right good wood also and about as hard as a rock. Pity you can't get any lumber from local grown timber, I'm sure someone will put a blade to some timber sooner or later.
We have two kinds of locust around here Honey Locust and Black Locust. Honey Locust is yellow in color, doesn't have much rot resistance and is quite soft compared to Black Locust which is orange in color, highly rot resistant and hard as a rock.
Thanks
-
31st January 2010, 02:29 PM #12New Member
- Join Date
- Jan 2010
- Location
- Pennsylvania, USA
- Posts
- 7
Similar Threads
-
Red gum fence posts?
By tea lady in forum WOODTURNING - GENERALReplies: 44Last Post: 8th August 2009, 12:23 AM -
Old Red gum fence posts
By Stevenp in forum WOODWORK - GENERALReplies: 22Last Post: 5th May 2008, 01:19 AM -
Honey Locust Hollowform
By OGYT in forum WOODTURNING - GENERALReplies: 12Last Post: 8th November 2006, 03:37 PM -
old fence posts
By goodwoody in forum TIMBERReplies: 7Last Post: 2nd April 2004, 11:13 PM