Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
-
13th July 2019, 05:09 PM #1Slowly but surely he learns
- Join Date
- Sep 2008
- Location
- Perth
- Age
- 44
- Posts
- 80
Blum Insert Hole Boring - Template Ideas
I've had a number of vinyl wrap cabinet doors made up and bored for concealed hinges but the manufacturer only bored the 35mm holes, without the 8mm holes either side. It looks like the door cores are MDF. I'm using Blum Inserta 110 deg soft-close hinges (already purchased).
I'm aware of various Blum templates but they seem pricey, especially for the small number of hinges I need to mount (~30). Any ideas for a simple template to mark out and maybe bore the additional holes? I think I've got the measurements from the Blum catalogues so can probably mock something up.
The cam mounting plates also include a split dowel/plug ("Exando"?); should I drill for that diameter, which I believe is 5mm?
Will experiment on some scrap first, methinks. Welcome your thoughts though.
Hinge1.jpgHinge2.jpg
-
13th July 2019 05:09 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
13th July 2019, 07:17 PM #2
take the doors back get the job done correctly.
I would love to grow my own food, but I can not find bacon seeds
-
13th July 2019, 07:52 PM #3Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
We made a jig at work for this exact purpose; a piece of 1.5mm thick aluminium (MDF will do fine, we used ally for durability) with a 35mm plug fixed to it that went in the hole so the edge of the jig was flush with the edge of the panel and 2 guide holes in the appropriate place for the 8mm holes.
Alternately, just mark them out and drill them manually.
The hinge plates are 5mm holes with 32mm spacing (from memory they're 37mm back from the front edge of the cabinet).
-
13th July 2019, 10:10 PM #4Slowly but surely he learns
- Join Date
- Sep 2008
- Location
- Perth
- Age
- 44
- Posts
- 80
For anyone interested, this is the layout I've come up with--taking dimensions from the Blum catalogue and figuring out a few of the dimensions which aren't noted (edge to centre of 8mm holes). Haven't road tested as yet but will give it a shot tomorrow. Hinge.PNG
-
14th July 2019, 10:42 AM #5Taking a break
- Join Date
- Aug 2008
- Location
- Melbourne
- Age
- 34
- Posts
- 6,127
-
14th July 2019, 10:18 PM #6Slowly but surely he learns
- Join Date
- Sep 2008
- Location
- Perth
- Age
- 44
- Posts
- 80
-
14th July 2019, 11:18 PM #7
Kreg could be your answer, $45 total tools
I would love to grow my own food, but I can not find bacon seeds
-
19th July 2019, 10:36 PM #8Slowly but surely he learns
- Join Date
- Sep 2008
- Location
- Perth
- Age
- 44
- Posts
- 80
I had a crack at making my own template but couldn't for the life of me get it as spot on as it must need to be. So I bought the Blum drilling template for about $45 and was able to very quickly get the job done. I didn't realise but it can be used to bore holes for both Inserta and regular screws, and can also be used for drilling mounting plate screw holes. It also includes depth stop collars (secured with a set screw) and a setup guide built into the sliding fence. The sliding fence is really easy to use too. Altogether, very nicely idiot-proofed )
-
21st July 2019, 11:12 AM #9
So the Kreg jig also comes with the drill bit? Seems like I might be in the market for one also [emoji3]
Now proudly sponsored by Binford Tools. Be sure to check out the Binford 6100 - available now at any good tool retailer.
-
21st July 2019, 07:54 PM #10Slowly but surely he learns
- Join Date
- Sep 2008
- Location
- Perth
- Age
- 44
- Posts
- 80
The one oddity of the Blum template I bought is that it's not for the main 35mm hole--it assumes that's already been drilled (which was the case for me). Drilling that hole is straightforward using the centre spur of a 35mm forstner. No drill bits included, only the depth collars.
The Kreg jig looks like it would be pretty good for getting the main cup hole drilled accurately (especially the depth) and it seems to do the mounting screw holes too. Not sure it does the 8mm inserta holes though? Good price if it includes the fortner bit... think I paid close to that for a CMT-branded bit from Carbatec.
-
21st July 2019, 08:35 PM #11
Tony
I agree with you on this knowing how simple it is when you have the right machine. Allow 30 seconds to drill each set of holes. Normally all three holes would be drilled simultaneously: Still only takes thirty seconds per group of holes including positioning.
Michhes
You paid for the job so it should be done correctly.
Regards
PaulBushmiller;
"Power tends to corrupt. Absolute power corrupts, absolutely!"
Similar Threads
-
Condell Park - Blum Minipress MSP hinge drill press with 7-hole multihole adapter
By Luigi in forum FOR SALE on eBay and external sites.Replies: 1Last Post: 30th August 2018, 05:17 PM -
Large hole boring
By cellist in forum WOODWORK - GENERALReplies: 2Last Post: 13th January 2009, 12:40 AM -
Post Hole Boring
By STAR in forum MY RURAL BLOCKReplies: 11Last Post: 1st September 2008, 02:03 AM -
Long hole boring
By Woodchuck2 in forum WOODTURNING - GENERALReplies: 9Last Post: 25th August 2000, 07:09 PM