Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
22nd January 2014, 09:18 PM #1Novice
- Join Date
- Aug 2013
- Location
- Melbourne
- Posts
- 19
Carbatec 10" Combination Jointer/ Thicknesser - Adjusting Beds
Hi All
I own the Carbatec 10" Combination Jointer/ Thicknesser the beds came from the factory severely out of coplanar. I have since drilled out the roll-pins and made it as good and in line as i can get it. However is is still unsatisfactory.
I find that adjusting the beds that the adjustment is much to coarse, and on the other side very hard to achieve good results by using roll-pins and shims. I am planning to remake some sort of adjustment mechanism and was curious to see if anybody had done/ seen the same thing done? On this combination machine both beds flip over separately, i was thinking of trying to attach something where they hinged together similar to the Jet models.
Thanks in advance!
-
22nd January 2014 09:18 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
Similar Threads
-
Opinions of the Carbatec Combination 10" Planer/Thicknesser
By alex_m_84 in forum WOODWORK - GENERALReplies: 15Last Post: 16th December 2013, 10:00 AM -
Carbatec Combination Thicknesser/ Jointer Easy to disassemble?
By tomo_scotto in forum TABLE SAWS & COMBINATIONSReplies: 7Last Post: 11th June 2012, 04:25 PM